Androda's latest activity

With the Portable fully "turned off" there should be no SD card access going on. It should be relatively safe to pull the SD card and...

A modification such as the below would probably work for your Portable-specific board. Take the voltage from PDS A2, pass it through a...

This is almost certainly because your BlueSCSI is an older hardware revision which is known to have issues waking from sleep. A fix is...

Actually a great many people use the DB25 style specifically for this kind of usage. Plug it in when enjoying your vintage system, and...

I found this page with a bunch of pictures of SCSI to Ethernet solutions from a few providers...

April 13, 2024 Board Meeting Attendance: Kai Robinson, fogWraith (Christian), Jacob (Androda), Justin (jdmcs) Absent: Josh (Drake)...

Yes indeed. The PowerBook 100 is a miniaturized Mac Portable with a few improvements in the power management circuitry. Lead acid...

Anyone have the TRG Xtra Xtra (or Pro) upgrade, or any other RAM / flash upgrade boards for Palm Pilots? You may be able to guess where...

I enjoyed Palm Pilots. Had the Fossil Abacus Wrist PDA watch, which honestly was mostly useless but still random and fun.

Although the M5120 and M5126 are different, I believe the connections between Power Manager chip and VIA are the same. Check that all...

The /AS line is used to determine whether the RAM upgrade card should be "selected" for use by the system. Removing that jumper...

I did not, because of the answer to question #3. Correct, the main 5.2v rail is required for PRAM value retention. I do not recommend...

Two resistors are required. One end of the resistor connects to the point on the Pico header as shown. The other end of the resistor...

Well done. Now hopefully the copper doesn't oxidize over time and break contact.