0dan0's latest activity
-
It's #MARCHintosh 2025! Join in on the fun and post your project or play with some new stuff in our #MARCHintosh 2025 thread.
-
00dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).Seems my new macro lenses are potentially held-up in customs. In the meantime here is the latest build (type C) where you can use the...
-
00dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).I was about to give up, it took about 150 builds to allow the use of the lens' full FOV, without the color going wrong. New lens should...
-
-
00dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).I was able to get this to work: original on the lens, 8mm with extension tube on the right. However as this is cheap, non-macro glass...
-
-
00dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).While it did manage to get the capture more centered, still haven't found what will impact the Bayer phase to restore the color. Any...
-
00dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).Today's progress report. I'm now encoding the wider image (clip below). The largest area I can scan is 1920x1440 (rather than 820x500)...
-
00dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).I got the LCD stable
-
-
00dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).Small break through. I have determine one location when the active sensor region initialized and add some new code for a wider FOV, and...
-
-
00dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).As the lenses are only $10-15ea I have purchased range to test, all seem to suffer the same issue. The current lens mount is too short...
-
00dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).Hacking investigations continue. I hope the updates are enjoyed, as using this to document my steps. I got the serial port and shell...
-
-
00dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).Set the white balance is very easy, so you could make your firmware less yellow a few hexediting steps. If you reduce the red or...
-
-
00dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).My current theory, my RS232<->USB not be 3.3V compatible.
-
00dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).@Mac84 I've tried to setup the serial port, but not quite there Boot up looks like, this after a few seconds This once unit is up...
-
