0dan0's latest activity
-
0dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).I have not found an easy solution. My first unit (Build #1) was extra messy, this used the 5mm extension ring. This first design is... -
-
0dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).Here is Kodak Vision 3 negative (home developed) through my modified Reels scanner. Not too bad. The white balance was changed to...
-
-
0dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).This is with the replacement 12mm lens, although it should help the stock lens a tad. As thjakob discovered, you might be able to move...
-
0dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).Type B is finally working fully (matching C.) The upgrade is significant.
-
-
0dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).No stabilization needed, you just need a locking ring: My Type C has the 12mm lens at 26mm, so the 8mm lens at 18mm, for a very...
-
-
0dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).This is great test. How many millimeters from the lens front to the film?
-
0dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).I still have an issue with my Type B with 12mm lens zoom out to the max. My original Type C lens hack with a the lens slightly closer...
-
-
0dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).I wasn't every able to focus the original lens when moved too much closer. Also as you move the lens down, it hits the film loading...
-
-
0dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).Thank you for your feedback, and I'm very happy that you making your own white balance versions, and that someone it benefiting from the...
-
0dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).Try it, I wasn't aware of LS1.
-
0dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).Those are not likely a serial port. You need to find RX and TX pins/pads.
-
0dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).You are correct. Corrected Zip attached
-
0dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).v6.1 for type B & C In an attempt to make the frame more stable, dark images can now increase to ISO 200 (range 50-200), rather than a...
-
