0dan0's latest activity
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Adjust using the Picture settings first, increasing the White Bal to 2.0. If still too blue, start the capture, then adjust the third... -
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Correct. The range of film means the ISO needs to vary. The algorithm will aim for the lowest practical for the film's density.
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Release V7.6 This adds info reporting the sensor read-out resolution, but leaves the encoding resolution at 1600x1200 for now. This is...
-
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Print your own if you can https://www.stlfinder.com/model/super8-to-normal-reel-adapter-ovQWakM0/2572373
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Framing is likely working after the reboot.
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).That is not the adaptor. The red and grey posts are just classic 8mm style reel hubs. You need to attached this over the red post:
-
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Now for something not really firmware related, sensor read-out noise. Turns out the Reels has a lot of it. Any double-Es out there...
-
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Oopps, I had the red offset wrong: Default values should be: WBAL (current defaults) 2.0 592,256,256 1.5 560,256,256 1.0 528,256,256...
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).It will not. Only the AZURE-1228MAC 2/3" 12mm F2.8. The lenses need to be designed as a macro.
