0dan0's latest activity
-
Hey Guest, MARCHintosh 2026 is upon us. Check out community projects, join GlobalTalk, and have fun!
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Stock lens resolves about 640x480 for an 8mm frame. Film is about 4000 dpi as the active frame is about 7mm wide (Super8), theoretical... -
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).No guide for the case mod, but I've done four now. However, you should begin the hardware modification until the new firmware is...
-
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Attached to the Type D installer firmware (.BIN) and uncompressed binary (.RBN, use this in Ghidra and editing) in a zip. This is...
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).A2021 A J2021 A M2021 A P2021 A A2022 A M2023 B A2724 B E3124 B H2324 C K3124 C C1725 C D2825 Weirdly this seem to run...
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).There is very steep learning curve to bring type D's up to date, so I will be getting one this weekend to help speed-up the conversion...
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Aptina AR0330. Yes on all models I've seen. This not the sensor claimed on the back of the unit.
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Thank you, these are helpful. I wanted to see if the frame cadence was different when there is jitter. These two show the same cadence...
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Hmmm.. not quite how it works. While there is some disagreement on the resolution resolved for CFA Bayer sensor, it is not half as you...
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Yes, that is a type D. The exposure flicking is one of the many problems the firmware hacks help address (and hopefully/eventually for...
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).v7.7 is getting close to all the features I would want for MP4 encoding film scanner. The main remaining fix is to either prevent or at...
-
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Version 7.7 for Type A, B and C (and stock FW recovery for D users.) So nothing for Type D yet, at least now unit can be recovered if...
-
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).@WowIndescribable H2324148BKxxxxx is a type C, so you have no need to wait. While the firmware hacks are is still changing, but the...
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).At least now Type D users can now be unbricked. The changes in the new firmware are more extensive that any other model. Function...
