0dan0's latest activity
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).This is base version (type D) that has creates code space by resizing and removing one of the JPEGs in the firmware. Can you confirm it... -
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).I'm away for this weekend, so take the UITRON.BIN and decompress if with ntktool (from dashcamtalk). You can then compare with the .rbn...
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).No updates for type D, yet D2825 units are not type D, I have one that runs Type B firmware. As we have imaged all known models, you...
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Seems like one of the cables is not restored correctly. The main power LED is only white. You could see if you have console output...
-
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).I modified @Deano 's new lens cover to be more FFF printer friendly, and fit the larger mounting lens offset bracket I'm using. While...
-
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Here are two example of mounting on the inside of the unit. Last one was mount on the right rear side so the cable was well clear of...
-
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).I always zoom in to the maximum, that way the LCD resolution is not an issue.
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Just short RST to GND, and TX on the main board goes to TX1 on the Nano, same for RX to RX0 and GND to GND.
-
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Great post. I have stopped using the 3mm F-stop change, while it does make focusing easier (not required), and it does add some...
-
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).It is probably okay. I didn't follow the guide exactly, and used whatever I had around.
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).The existing USB port has a different function, it is not connecting to the debug interface that's on the main board. I just added...
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Thank you. I have attempted to get an H2825 model from eBay, but many sellers will not respond to enquires about serial number (even ask...
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).If you can add the serial port, then you can dump the firmware, this must be before any update attempts (if you want exactly what your...
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Yes, that would appear to be type D. Through which seller do you buy this?
