0dan0's latest activity
-
Hey Guest, MARCHintosh 2026 is upon us. Check out community projects, join GlobalTalk, and have fun!
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).I got it working again. Just had no time since. -
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).You can try a constant, but that will cause capture crashes with some film/grain.
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).@videodoctor The RBN wouldn't be useful as a development base, as I just masking-out code to see what was causing capture the issues...
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Yep. Something was breaking captures, which is what I was working on.
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).It is not doing anything for a firmware update. I will be opening it up next.
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Reels Type D development has hit a roadblock. My unit stopped working, it was working but crashed during a capture, and will not power...
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).I originally tried this approach, but don't remember if it was the door position or focus issues that made find the new lens. But...
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).I expect they had trouble sourcing AR0330 sensors (12 years old), only the sensor board is changed.
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).D type opened, and ready to add a COM port.
-
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).These are great for getting dust off the sensor https://www.amazon.com/dp/B0CPFHNPBQ
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).It is possible that some of the jitter can come for the film being pulled too hard, however not all, as it can happen with no pulling...
