Recent content by CaseyAC

@jmacz wow, thank you for remembering my post and coming back to comment on it! So, basically, you added a 470 ohm resistor between REQ and TERMPWR? Like on the external SCSI port pins 26 and 48?

Just posting an update. I've tested all of the pins from UI12 with no issues - going to keep going through UI8, UJ11, etc. I feel like I have to come across something...

Great information, thanks a lot! I'll look into it :)

I was powering only through termination power. Based on your suggestion, I tried powering it with a USB cable and external power brick. Unfortunately, this didn't help. My SE/30 does have plastic ROM clips, but they look like they're in good condition and I also use 3D-printed external clips...

Based on your suspicion, I recapped C8-C9-C10 and checked/reseated the rest of them - no affect, unfortunately.

Hi - thanks for taking a look! I did try a BlueSCSI pre-made image with the same result. The BlueSCSI is terminated but I did not enable the "BACK_FEED" jumper. I should add this is the BlueSCSI v2 desktop. The original HD is not connected - I've only connected one or the other. I'll try to...

Hi all, New at posting here but reading the forum has helped me resolve many issues, so hopefully someone will have an idea what could be causing this problem. I'm working on my first SE/30 repair. So far I've recapped the logic board - which restored sound, recapped the analog board - which...