caver01's latest activity
-
Ccaver01 replied to the thread Macintosh Mini - (yet another) Maclock conversion project.Two steps forward one step back: Having constructed a working Micro-to-USB-A adapter cord that I will mount in the back, I wanted to...
-
Ccaver01 replied to the thread Macintosh Mini - (yet another) Maclock conversion project.Also, I WAS able to tweak the gain on the audio using the trim pot. I think for now I will be satisfied with a compromise between...
-
Ccaver01 replied to the thread Macintosh Mini - (yet another) Maclock conversion project.Perfect! Thanks! I was finally able to get in there with a multimeter and probe my button 1 and sure enough, it was non functional...
-
-
Ccaver01 replied to the thread Macintosh Mini - (yet another) Maclock conversion project.I noticed a trim pot on the Adafruit sound module. I think it’s a gain adjustment but I wonder if adjusting it would have any effect on...
-
Ccaver01 replied to the thread Macintosh Mini - (yet another) Maclock conversion project.
-
-
Ccaver01 replied to the thread Macintosh Mini - (yet another) Maclock conversion project.Just noticed that my button to on the bottom right is not doing anything. I need to do some continuity tests I guess. Something isn't...
-
Ccaver01 replied to the thread Macintosh Mini - (yet another) Maclock conversion project.The script ran perfectly, I assume, while I did other things. When I came back the SSH had disconnected but I could see messages that it...
-
Ccaver01 replied to the thread Macintosh Mini - (yet another) Maclock conversion project.@wells or @wottle, any chance you have advice about SCP failing with --stalled when trying to transfer my disk image? I am running the...
-
Ccaver01 replied to the thread Macintosh Mini - (yet another) Maclock conversion project.@wells thanks for confirming the display issues. Pressure definitely affects things, though I would be surprised that horizontal stress...
-
Ccaver01 replied to the thread Macintosh Mini - (yet another) Maclock conversion project.Having taken up @wottle on his offer above, I am also on my way with this project using @wells board. I'll post a photo or two when I...
-
Ccaver01 replied to the thread Vintage mouse using Bambu Mouse 002 kit.Here is a brief update for anyone who is considering using the Bambu kit. . . I found that with a good print, the model I used above...
-
Ccaver01 replied to the thread Vintage mouse using Bambu Mouse 002 kit.Oh, nice timing I guess. That Lisa case project would be a nice match. Very cool!
-
Ccaver01 replied to the thread Vintage mouse using Bambu Mouse 002 kit.By the way, the kit is a true 3 button mouse, with FOUR buttons, actually. There's left, right, and center (that small little square...
-
CFinally printed a vintage Mac mouse designed for the Bambu Mouse 002 kit. The kit is avaialble in the Bambu shop. It is cheap and it is...
-
