domb84's latest activity
-
Ddomb84 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).Great work on the firmware adjustments. I have an m127 machine which appears to be much the same as the kodak etc but runs different...
-
Ddomb84 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).Thanks i’ll take a look into it. I’m a complete novice with this so it’s a bit slow trying to reflash the chip with each change. My main...
-
Ddomb84 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).I cannot seem to create a modified ROM that will boot. I believe it's down to the partition scheme but I'm out of ideas a this point. I...
-
Ddomb84 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).Hi Joe, yes I tried all of those. I have managed to get a better SOP8 clip and I flashed my modified firmware back and it didn't boot...
-
Ddomb84 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).Finally worked out how to keep the correct offsets after modifying the firmware. Open the firmware dump with NtkTool Make a note of the...
-
-
Ddomb84 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).Using the cli to pack and specify the offset works, so must be a bug in the UI. .\bfc4ntk.exe -p...
-
Ddomb84 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).I've tried to compress a modified bin with NTK tool and flash it back using an SD card. Curiously if you place any file on the SDCARD...
-
-
Ddomb84 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).Filed some plastic off the clip and managed to read it. I've attached the raw dumped firmware from the M127 machine, plus the unpacked...
-
-
Ddomb84 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).Thanks for the reply. I can't seem to get things to improve. If I flip the connector around it seems to short out the CH341a and not...
-
Ddomb84 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).So, I dismantled the M127 machine and found it has an MX25L3206E ROM chip. I've connected up a CH341a chip programmer with an 8 pin chip...
