Recent content by jktw

I haven't actually tried to power this up yet (still need to buy a BR-2/3 battery), but I'm planning to do both boards in the N4000, the main board and the power supply. The analog board in mine ends in -13, and there are a few differences to the -12 you posted above, but most of them are the same.

@Elemenoh Do you happen to have a mouser or DigiKey part list handy for any of the caps? I started looking them up, but some of these have a lot of options. My only other recap job was from a kit, so it would be helpful to cross-check my list.

Nice work on the MO drive, that's a lot to remove. I got my L board off the N4000 and the logic board is part number 1-623-855-13 - a later revision than the N4000 logic board pictured on asterontech. I see some differences between the Next logo and the flyback transformer. Anyway, I started...

I found instructions in Appendix B of the service manual, will try this when I have time:

Hello, I am dusting off a monitor and cube that have been in storage for 20ish years. I started disassembling the N4000 display to check the capacitors, but on step 6 here is it really required to remove all 20+ screws!? I'm about halfway through and out of time for now. The top seems like it...