jmacz's latest activity
-
jmacz replied to the thread 3D Printing & MacEffects Appreciation.Ok, I will bite. I will try to draft something up this weekend. You basically want stock mount points for a 3.5” drive, stock location... -
jmacz replied to the thread 3D Printing & MacEffects Appreciation.LOL
-
jmacz replied to the thread 3D Printing & MacEffects Appreciation.That is correct! :) The case is a stock case that was beat up and badly yellowed. I fixed the cracks and then painted it matte white...
-
jmacz replied to the thread 3D Printing & MacEffects Appreciation.This is one thing I have not modeled. I always took the lazy route. I use ZuluSCSIs and got them with a 3D printed 3.5“ bracket. I then...
-
-
jmacz replied to the thread Quadra 950 PSU options.The following post was what I have been using to do this for my Mac II, IIci, Quadra 700, and now Quadra 950. The article is about the...
-
jmacz replied to the thread Quick question about some parts and an SE/30 reloaded project.My guess is those were what remained of the fuses at F1, F2, and F3.
-
jmacz replied to the thread Quadra 950 PSU options.I just replaced my dead 950 psu with a Corsair HX1200 PSU (puts out enough amps on the 5V rail .. 30A). Fit into the stock psu casing...
-
jmacz replied to the thread Upgrading Powerbook 190 to 68040 with FPU?.I have successfully done it on a PowerBook 540c and a PowerBook Duo 280c. @croissantking is the first I saw do it successfully (the...
-
jmacz replied to the thread Macintosh IIci strange power on behaivor.Certainly not normal… but very common. Leaking capacitors C10 through C13 cause damage to the IIci’s soft power circuit by damaging...
-
jmacz replied to the thread 3D Printing & MacEffects Appreciation.That almost sounds like what it takes to purchase a piece of Goro's jewelry :)
-
jmacz replied to the thread 3D Printing & MacEffects Appreciation.I agree with everything @caver01 stated. He is spot on. I do feel that infill has to be provided as an option to the purchaser for the...
