joevt's latest activity
-
Jjoevt replied to the thread Apple Network Server MacOS based ROMs found.@startvec.>'excp stores the default exception handler which is _exception This does a throw of the exception vector number. Maybe it can...
-
Jjoevt replied to the thread Apple Network Server MacOS based ROMs found.I have a Trace for Open Firmware script that can show what's getting executed. It needs more work but can do some simple stuff. It...
-
Jjoevt replied to the thread Apple Network Server MacOS based ROMs found.The nvramrc script and nvram variables that get modified by classic Mac OS are stored in OFpt resources in the Startup Disk control...
-
Jjoevt replied to the thread Apple Network Server MacOS based ROMs found.Does the ANS graphics controller or internal SCSI devices work once you are booted using the 1.1.20.1 ROM? #42 describes...
-
Jjoevt replied to the thread Apple Network Server MacOS based ROMs found.Right. 1.1.20.1 and 2.0 have a normal implementation for AAPL,ROM's load and open words. 1.1.22.1 removes a call to <bye> in AAPL,ROM's...
-
Jjoevt replied to the thread Apple Network Server MacOS based ROMs found.Does the extra work require more than the nvramrc patches for the AAPL,ROM device I suggested at...
-
Jjoevt replied to the thread 2026 PowerPC Challenge, is it happening?.So pci137a,5 is probably connected to the pci-bridge. The bridge is a "XIO2000(A)/XIO2200A PCI Express-to-PCI Bridge" which means...
-
Jjoevt replied to the thread 2026 PowerPC Challenge, is it happening?.Are you sure the SATA controller is not the one in SLOT-2? ASMedia (1b21) ASM1060 is a SATA controller PCIe 2.0 x1. The bridge chip says...
-
Jjoevt replied to the thread 2026 PowerPC Challenge, is it happening?.Your benchmarks for the Orico are better than SATA I (150 MB/s) but not SATA II (300 MB/s). Are you sure it's connected as SATA III...
-
Jjoevt replied to the thread Viability Of Transplanting A PowerMac B&W REV. B's Fixed IDE Controller Onto A REV. A Board?.B&W G3 Yosemite REV C schematics at: https://www.macdat.net/repair/apple_schematics.html The pages are not in order and it's not OCR'd...
-
Jjoevt replied to the thread PowerBook 100 & 170 owners.I think you mean 21.1 cm x 13.1 cm = 8.307 in x 5.157 in = 9.778 in diag = 77.2 dpi cm instead of mm.
-
Jjoevt replied to the thread Cracked Hinge on Mac Portable.You would need to drill through the transparent piece and the plastic of the subframe? The alternative to drilling or cutting is...
-
Jjoevt replied to the thread Cracked Hinge on Mac Portable.I think it would look cleaner without the transparent plastic piece. The JB Weld might perform better if it's thicker but I have no...
-
Jjoevt replied to the thread PowerBook 100 & 170 owners.The error may be up to less than an 1/8 of an inch which is not bad since you are measuring in eighths of an inch. bc <<< 'scale=10...