max1zzz's latest activity
-
Mmax1zzz replied to the thread ITXPlus: A ITX Sized Macintosh Plus Logicboard Reproduction.The answer is I don't really know! There will be at least the three from the remainder of the prototype run then at least another 4 from...
-
Mmax1zzz replied to the thread ITXPlus: A ITX Sized Macintosh Plus Logicboard Reproduction.So what's next? The boards need a little tweaking to resolve the issues noted above, once this is done I'll get another run of test...
-
-
Mmax1zzz replied to the thread ITXPlus: A ITX Sized Macintosh Plus Logicboard Reproduction.So with the board booting it's time to look at the I/O First to be tackled was the SCSI connectors, these where soldered on and the...
-
-
Mmax1zzz replied to the thread ITXPlus: A ITX Sized Macintosh Plus Logicboard Reproduction.So, As mentioned above the board is now booting and working just fine but how did we get here? When the board was initially tested...
-
-
Mmax1zzz replied to the thread ITXPlus: A ITX Sized Macintosh Plus Logicboard Reproduction.I do think it is a little stretched though I think this might be more a artefact of it being displayed on a 16:9 LCD as I have seen...
-
Mmax1zzz replied to the thread ITXPlus: A ITX Sized Macintosh Plus Logicboard Reproduction.I have been a little slow updating this thread but testing and tweaking has continued in the background, I'll do a full write up over...
-
-
Mmax1zzz replied to the thread ITXPlus: A ITX Sized Macintosh Plus Logicboard Reproduction.It's late and I'm not doing a full write-up tonight, but I'll just leave these here (excuse the potato video, it's that or a massive...
-
-
Mmax1zzz replied to the thread ITXPlus: A ITX Sized Macintosh Plus Logicboard Reproduction.You could quite easily just jumper HSYNC, VSYNC and video through and remove the pico module however this will leave some extra...
-
Mmax1zzz replied to the thread ITXPlus: A ITX Sized Macintosh Plus Logicboard Reproduction.RAM is setup exactly as it would be normally would be just without those pesky simm slots :) The performa clone won't fit as it is...
-
Mmax1zzz replied to the thread ITXPlus: A ITX Sized Macintosh Plus Logicboard Reproduction.All the non programmables (and the ROM) are soldered down, will get all the PAL's programmed and installed tomorrow. Also still waiting...
-
-
Mmax1zzz replied to the thread ITXPlus: A ITX Sized Macintosh Plus Logicboard Reproduction.PCB's are here!
-
-
Mmax1zzz replied to the thread ITXPlus: A ITX Sized Macintosh Plus Logicboard Reproduction.The HD15 connector is a standard VGA output generated using GuruThree's Raspberry Pi Pico based converted - you can see the big 40pin...
-
Mmax1zzz replied to the thread ITXPlus: A ITX Sized Macintosh Plus Logicboard Reproduction.Boards have been sent off to JLC, hopefully I should have them in hand by the end of next week :)
-
Mmax1zzz replied to the thread ITXPlus: A ITX Sized Macintosh Plus Logicboard Reproduction.They are indeed
