NJRoadfan's latest activity

  • N
    NJRoadfan replied to the thread Modern MacBinary Tool for MacOS 26.
    AppleDouble has the advantage of incorporating the Finder Flags (archive bit, label/colors, etc.) into the archive as well since it has...
  • N
    NJRoadfan replied to the thread Modern MacBinary Tool for MacOS 26.
    I'm guessing the .info files are the raw 32 byte FinderInfo data? If so, you can grab this natively from macOS file systems by dumping...
  • N
    NJRoadfan replied to the thread Macintosh Server G3.
    Both cards were BTO options on the beige G3, so no surprises there. The server configurations generally came with AppleShare IP...
  • N
    NJRoadfan replied to the thread Modern MacBinary Tool for MacOS 26.
    The UnArchiver can extract MacBinary and Stuff-It files on a modern system. In terms with disk imaging tools, there is CiderPress II...
  • N
    NJRoadfan replied to the thread 68kmla MIA.
    I heard the Mac chime, its back.
  • N
    NJRoadfan replied to the thread [2GS] Using SCSI drives.
    Jumper to fast mode (basically this sets the card to appear as a SmartPort device) and place it in Slot 5 if you want to use more then 2...
  • N
    NJRoadfan replied to the thread DOS on Mac.
    Technically yes if you can find an old copy of PCMacLan that works on Windows 95. COPSTalk was also available as well. Also, if running...
  • N
    NJRoadfan replied to the thread DOS on Mac.
    "Obtain IP Address Automatically" is DHCP and should work. One thing to try is changing the TCP/IP connection in Open Transport to...
  • N
    NJRoadfan replied to the thread DOS on Mac.
    Windows 95 can use a real mode ODI driver with its native network stack. The "Existing ODI Driver" is the stub driver you need to load...
  • N
    NJRoadfan replied to the thread DOS on Mac.
    That's Apple's stock PC Setup software that shipped with their cards. Its likely the 3rd party PC Setup 2.0.1 will work with this card...
  • N
    NJRoadfan replied to the thread Assemble a TransWarp GS CPU cable?.
    As stated on several sites, the wire pairs need to be flipped similar to this example...
  • N
    NJRoadfan replied to the thread Assemble a TransWarp GS CPU cable?.
    That website has the pinout for the top connector, not the main CPU socket.
  • N
    NJRoadfan replied to the thread Assemble a TransWarp GS CPU cable?.
    The pinout of that cable is weird. The Bill Shuff cable I have has all pairs twisted (reversed) at the TWGS end of the cable. The pinout...
Show older items
Top Bottom