phipli's latest activity
-
Pphipli replied to the thread New LC475 user - Questions on PowerPC upgrades.The wait states are changed depending on what bus speed is selected to keep in spec for the speed of the parts used on a stock LC 475. I...
-
Pphipli replied to the thread New LC475 user - Questions on PowerPC upgrades.I've shared everything I can before.
-
Pphipli replied to the thread New LC475 user - Questions on PowerPC upgrades.The 475 and 575 use a chipset derived from the 650 / 800 chipset. They're all technically spec'd up to 40MHz. There are datasheets...
-
-
Pphipli replied to the thread New LC475 user - Questions on PowerPC upgrades.I suspect it isn't what you're thinking, but interestingly @Trash80toG4, only the CPU and PLL aren't rated for 40MHz on the LC 475. I've...
-
Pphipli replied to the thread New LC475 user - Questions on PowerPC upgrades.The same version should be available in both places, but I'm more likely to forget to update my website than Macintosh Garden. I would...
-
Pphipli replied to the thread Radius Rocket & SCSI Booster Clones.Surely, you could test RadiusShare to confirm if the card works instead of asking other people to set up specific configurations?
-
Pphipli replied to the thread Radius Rocket & SCSI Booster Clones.Yes, RocketWare makes it behave as an accelerator, RocketShare is more like a modern Virtual Machine. If adverts say it can boot from a...
-
Pphipli replied to the thread Radius Rocket & SCSI Booster Clones.Hum, also, given the booster is on the Rocket's PDS, I'm not sure how you'd be able to boot the IIci from it? Have you tried it in...
-
Pphipli replied to the thread New LC475 user - Questions on PowerPC upgrades.You might want to try this : https://macintoshgarden.org/apps/control-strip-475-overclock To get it reliable at 40MHz, you'll want to...
-
-
Pphipli replied to the thread Radius Rocket & SCSI Booster Clones.Do you have the driver for the booster installed? I feel like I remember it had an extra extension.
-
Pphipli replied to the thread 6100 Schematic?.Ah right, sure, if it boots to desktop that is a good sign, the card wont do anything without a driver installed. You don't need Mac OS...
-
Pphipli replied to the thread Mac OS for CHRP systems.Find attached stuffit archives (hqx'd) of the contents of the two discs CHRP installer tomes.
-
Pphipli replied to the thread Mac OS for CHRP systems.Often the System Folders on installer CDs are crippled so they don't work from hard disks. Have you tried just installing it, and making...
-
-
Pphipli replied to the thread 6100 Schematic?.If it isn't booting it isn't because of drivers. Without the driver, a 6100 will just boot from its built in processor. Try cleaning...
-
Pphipli replied to the thread 6100 Schematic?.The boards are very similar - The 7100 and 8100 are based on the 6100. The 6100 is close to the prototype for the whole family and late...
