phipli's latest activity
-
Pphipli replied to the thread Quadra 800 "Wombat" overclocking - options.(You'll have to forgive me - I made several edits to my last post, so make sure you read the final version)
-
-
Pphipli replied to the thread Quadra 800 "Wombat" overclocking - options.Mine actually started as a 25MHz machine :) I've run it all the way up to 50MHz with various mods. Strangely, it is easier to convert a...
-
Pphipli replied to the thread Quadra 800 "Wombat" overclocking - options.Good morning @AlpineRaven. If you don't mind, I'll have a go at answering. I have a soft spot for Wombat family machines. That's fun -...
-
Pphipli replied to the thread Marchintosh 2024: Overclocking a Centris 650.If you're aiming for 40MHz, there are much easier ways to do it - plus you can use 40MHz timings, so that the serial ports etc keep...
-
Pphipli replied to the thread Any interest in Palm Pilots?.I wouldn't say it was dead - Dmitry and a few others are still doing interesting projects, hardware and software...
-
Pphipli replied to the thread Any interest in Palm Pilots?.I have a couple of different ones, but have a soft spot for the 68k based ones. The guy who wrote Chipmunk Basic for Mac also wrote...
-
-
Pphipli replied to the thread New LC475 user - Questions on PowerPC upgrades.Hum, I think you're getting muddled there - the LC 475 is very different to the LC III. The LC and LC II were very similar to each...
-
Pphipli replied to the thread New LC475 user - Questions on PowerPC upgrades.This is an LC 475 with a 128MB module fitted : The memory test takes almost exactly 1 minute with this much RAM.
-
-
Pphipli replied to the thread New LC475 user - Questions on PowerPC upgrades.No hardware fix needed - these just work up to 128MB with compatible RAM. Yes... but not more than a minute for 68MB. Something isn't...
-
Pphipli replied to the thread New LC475 user - Questions on PowerPC upgrades.I believe so, based on the datasheet. Looks like it is a 64MB SIMM. The LC 475 can take up to a 128MB SIMM, FPM. It should work with...
-
Pphipli replied to the thread New LC475 user - Questions on PowerPC upgrades.The wait states are changed depending on what bus speed is selected to keep in spec for the speed of the parts used on a stock LC 475. I...
-
Pphipli replied to the thread New LC475 user - Questions on PowerPC upgrades.I've shared everything I can before.
-
Pphipli replied to the thread New LC475 user - Questions on PowerPC upgrades.The 475 and 575 use a chipset derived from the 650 / 800 chipset. They're all technically spec'd up to 40MHz. There are datasheets...
-
