thjakob's latest activity
-
Tthjakob replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).it is approx. 18mm from the ‘lens housing’ to the film (the lens itself is approx. 1mm in the housing) The original distance is about...
-
-
Tthjakob replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).the subject of ‘video compression’ is currently far beyond my understanding - with this test I was merely trying to find out whether a...
-
Tthjakob replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).... now I'm a bit confused - would it be possible to get a sharp image with the stock lens using the full sensor size, contrary to the...
-
-
Tthjakob replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).If I look at the 40-pin ribbon cable, which is routed from the motherboard to an ‘intermediate board’, the PINS are routed 1 to 1 to a...
-
-
Tthjakob replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).well - after opening it I also saw how to remove the cover without opening the part... :) But as always - opening things up gives a...
-
Tthjakob replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).The original lens is turned quite far out. With this focal length, the image has to be scropped for a super8 film. Would it be possible...
-
Tthjakob replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).Good day to each other, Impressed by the possibilities to `modify` this scanner, I have been following this thread for quite a while -...
