wottle's latest activity
-
wottle replied to the thread Custom USB-C powered 8"display for the Apple IIc with STL files and build plan.I assume you're talking about the resin case being in sunlight? I've heard of yellowing of resin prints. I'm likely to try to paint it... -
wottle replied to the thread Custom USB-C powered 8"display for the Apple IIc with STL files and build plan.Got my replacement case parts optimized for resin. with the updated orientation for the hex key, It's the original front case with the...
-
-
wottle replied to the thread iBook G3 Clamshell display replacement failure, a cautionary tale.Might be worth trying to at least confirm that the ground pins are where the schema expects them to be. Would at least increase the...
-
wottle replied to the thread iBook G3 Clamshell display replacement failure, a cautionary tale.Could you clip the arms off the connector so you could insert it the proper way? Of course, that assumes all the pins are actually the...
-
As part of the massive barn haul I picked up last year, there was a Dell CRT that had a Trinitron tube in it, but had no power button...
-
-
wottle replied to the thread PS/1 recent pickup.Finally got a chance to put the other cap on the keyboard. Unfortuately it took 3 or 4 areassembly attempts of the keyboard to get it...
-
-
wottle replied to the thread Custom USB-C powered 8"display for the Apple IIc with STL files and build plan.Are you taking about something like helical inserts? https://a.co/d/7kPyx3O If the resin material is brittle, would this helical coils...
-
wottle replied to the thread Custom USB-C powered 8"display for the Apple IIc with STL files and build plan.Yeah, I am hoping a liberal amount of superglue will hold as well as an insert. Alternatively, a longer screw with a nut that could be...
-
-
wottle replied to the thread PS/1 recent pickup.OK, I was able to take the keyboard apart and the Caps were in very bad shape. I got them removed, but don't have a 2.2uF 50v cap on...
-
-
I recently picked up an Apple IIgs that I had to drive a little bit aways for. And I noticed on FB Marketplace that there was a nice...
-
-
wottle replied to the thread Custom USB-C powered 8"display for the Apple IIc with STL files and build plan.I took your parts and modified them a bit for resin printing. I twisted the hex pattern in the knob to allow the hex key to fit and...
-
-
wottle replied to the thread Today’s pickup - “portable” IIgs setup - help needed.Both at ROM 01 machines, so no real advantage there. I need to read more up on the accelerator - I suspect it will benefit running...
