wottle's latest activity
-
wottle replied to the thread Apple Lisa 3d Case Project.Ok, got it printed in platinum PLA. Certainly doesn’t match the original, but I think it does the Lisa look justice. I need to... -
-
wottle replied to the thread Apple Lisa 3d Case Project.Yeah, that was how I envisioned it. Worst case it’s four screws undone and you have access to all the switches to make adjustments...
-
-
wottle replied to the thread Apple Lisa 3d Case Project.Ok, added a little character to the case. The Apple / Lisa logo didn’t work out as I’d hoped. I was trying to use PETG as a support...
-
-
wottle replied to the thread Weird discoloration on Color Classic CRT.I tested some of the components in the degauss circuit and everything tested OK. The solder joints on the pins to the coil look good...
-
wottle replied to the thread Apple Lisa 3d Case Project.I've got some tweaking to do on some of the parts, but I'm pretty pleased for the first full print. The seam line, while pretty good...
-
-
wottle replied to the thread Apple Lisa 3d Case Project.Floppy disk vertical? Disks pop out like a toaster? Aside from the concerns over dust (we could put a flip cover to protect it when...
-
-
wottle replied to the thread Weird discoloration on Color Classic CRT.So, probably not the best idea, but wanted to see if it was a magnetization issue, so I took some magnets and moved it around by the...
-
I picked up a non-working CC a while back and just last night I tracked down the failure to boot to be from two failed vias by a leaky...
-
