Search results

Sometimes it’s good to feel indebted to another person, especially if you are friends. That feeling means you respect them, you don’t take their friendship for granted, and want to give back to them in some way. I am very thankful for all you’ve done and for all you continue to do for me, Kay...

That is why many of us have more than one of the same Mac. You can keep one in it’s pristine stock condition, and then add some fun things to the other unit which make it more practical, usable, and fun. But to be honest, if you install the device and decide you want to go back to the stock...

Yes, but once you try the Quadra boot chime, you'll never go back to the boring beep! :-)

I plan to show some short video clips at the end of my next video (due out within 72 hours) which shows just how low-profile Kay's ROM-inator kit is. Much lower profile than the one I made. Kay's version allowed me to slide the motherboard in normally without resorting to a flat-head screw...

Since it's Thanksgiving in the US today, I should express my thanks for Panasonic's low-ESR OS-CON capacitors. They're the ideal choice when recapping of the LC575 "Mystic" motherboard, especially when you upgrade the CPU and/or overclock. Enjoy that turkey, friends! 🦃

Thank you for your kind words about my video. The reason I purchased the monitor shown in my video was price. That HP looks like a great solution. However, I just checked the E190i on Amazon Japan and it shows a USED price equivalent to US$230. In contrast, I paid the equivalent of US$52 for...

That is of course a modification of the back panel taken from my now defunct LC575 carcass. No such slicing and dicing is being done on the precious Color Classic! The LC575 was purchased primarily for its motherboard, but it just so happens to be useful for other parts too! Anyway, I think...

My next video, due out this week, is about recapping with OS-CON capacitors. I will then release a short video very soon after that, mostly filmed by @Kay K.M.Mods. It highlights some amazing work that Kay did on the back panel -- a custom, hand-crafted work of art! Stay tuned! :)

Folks, I intend to show @Kay K.M.Mods' amazing craftsmanship on YouTube in less than 1 week. The video he made is pretty amazing. Stay tuned!

@Stephen, in June of this year, someone sent me some photos of a board he found inside his SE, which somewhat resembles your photos... He said it clipped onto one of the LS245 chips... He has no idea what the original function was, and there doesn't appear to be any info on it when...

The flux comes out on its own for reasons I mentioned earlier in this thread; namely, that once you press on the plunger to push out a little bit of flux, there continues to be increased pressure by the plunger on the flux that remains in the tube and so it keeps flowing out until that increased...

Due to the increased Rosin content, the MG chemicals flux that I use takes longer to burn off than the Amtech 559, and I’ve never been able to get the MG flex to sizzle either, which is nice. But the biggest benefit is the fact it comes with a decent plunger so I don’t have to 3-D print anything...

Do you have a video or a portion of an existing video that shows your 3-D printed plunger in action, @Branchus ?

I purchased this Adapter from Amazon (no switches at all) and found it to work exactly the same as my UnimacFly adapter when driving an external display from my SE/30 with Micron Xceed video card. I use that Amazon DIP-less adapter in my video here.

Gayle, thanks for sharing that story. I was 13 in 1984. When my father and I were in a computer shop early that year to pick up our fist home computer (the Macintosh 128K), I recall spotting the larger Lisa on display near the Mac display. I asked, "What's that?" To which my father replied...

It's wonderful to see your amazing success story here in the forum, Gale. Your attention to detail and determination paid off. Congratulations on a job well done! 👏 🥳

Interestingly, I've never lost a book. But at my age, the thing I increasingly lose these days is my mind. 🤪

Thank you for reminding me about that difference! The hole diameter of the MG Chemicals flux syringe (needle nose) is a bit wider than the AMTECH. Even so, it takes about the same force on the plunger to get each flux out via the needle during cold weather. I guess the added rosin in the MG...

Not yet. I merely posted my "review" of sorts here. I did read through all the Amazon reviews. Not a single person mentioned what I mentioned. I guess I alone care about such things, which is rather odd.

No, I'm satisfied with the MG flux for reasons mentioned in my opening post. I just had higher expectations for the AMTECH kit, and was a bit disappointed when comparing it to the MG, not simply in terms of the flux, but with regard to the dispenser. I absolutely LOVE the fact the MG plunger...