Search results

Use a 32GB cards or smaller, or try formatting the card as FAT32. I think the large card support was broken.

hist.c is up to date. I did have the flicker, which just means it need to be called form somewhere else.

Before my unit died, expo_iso at 0x80e5590c was working for me. The display of ISO value changed correctly as light was controlled.

Just me, working on top of Steve's initial work.

The 1600x1200, is still better than upscaling to 1728x1296 (1.3333:1). Although the scanning aspect ratio is 1.35:1, not 1.333, and the maximum resolution is 1452x1076. So you could try setting 1452x1076 for the encoder resolution (no scaling), or maybe 1456x1080 (more H264 compression...

I fixed that in my mods.

Maybe my D-type is not fully recovered. The motor starts but will not stop. MULTIREC_OFF!!!!!!!!!! MEDIAREC_VER_3_0! TEMPSTART OK!! ERR:IPL_FCB_Alg3DNR() ^G3DNR on.. ERR:IPL_FCB_AlgWDR() ^GIPL_FCB_AlgWDR = 6.. fileid:0 ERR:IPL_FCB_AlgIE() ^GWDR OFF.. MULTIREC_OFF...

I got it working again. Just had no time since.

You can try a constant, but that will cause capture crashes with some film/grain.

@videodoctor The RBN wouldn't be useful as a development base, as I just masking-out code to see what was causing capture the issues, not improving the system yet. I did learn that type D is almost a complete rebuild. Fortunately, some of the hacks are less needed, like the resolution changes...

Yep. Something was breaking captures, which is what I was working on.

It is not doing anything for a firmware update. I will be opening it up next.

Reels Type D development has hit a roadblock. My unit stopped working, it was working but crashed during a capture, and will not power on now. I think the crash is likely unrelated, this be a hardware failure. Any ideas? Nothing is output over the serial port.

I originally tried this approach, but don't remember if it was the door position or focus issues that made find the new lens. But 1152x864 is a big improvement, over Type ABC's 752x564. Using the 12mm lens, the active Super 8 frame is 1376x1032 (types ABC). This approach might be prefect for...

I expect they had trouble sourcing AR0330 sensors (12 years old), only the sensor board is changed.

D type opened, and ready to add a COM port.

These are great for getting dust off the sensor https://www.amazon.com/dp/B0CPFHNPBQ

It is possible that some of the jitter can come for the film being pulled too hard, however not all, as it can happen with no pulling reel attached. There is a firmware issue in the original, as it happens in stock unit too. I have some potential leads on next steps in firmware.

Thank you. Added the bug report to the repo.

Don't use iris lens caps, as that introduces vignetting. The issue is the plastic camera mount, the thread is too easily messed up, I had trouble with it too. Maybe on my next unit, I will print my own extension tube in TPU, soft enough to thread the lens onto, fill customizable length.