Search results

The test is try Quake RAVE or GLQuake for longer than 2 minutes. I expect the 275 to succeed with an ATI card, the TAM will freeze within 2 minutes.

Yes, and probably the TAM but I don’t have one to test on.

Beware of the ATI bug on 6500/300 if you have that specific model. Slower models do not have the bug afaik. Read more about it here https://68kmla.org/bb/index.php?threads/quake-rave-or-glquake-will-freeze-a-powermac-6500-if-a-dedicated-graphics-card-is-used.44411/

Version 1.4 has been released with some general improvements. https://phlogios.itch.io/blokzrave/devlog/717280/gameplay-fixes

Thank you for testing @joevt. I have heard reports that the game is playable in 8.6 if you supply the DrawSprocket and RAVE extensions from OS 9.0, but I have not tried it myself.

Thank you Byte Knight! This motivates me to add more improvements to the game and engine.

Version 1.3.2 has been released, and now it probably works in Classic Mode!

Blokz RAVE released for the end of MARCHintosh. https://phlogios.itch.io/blokzrave Requires a hardware-accelerated physical macintosh with Mac OS 9 to play, anything newer than iBook G3 Clamshell should run it fine unless there are bugs I haven't detected yet.

This is my first PowerPC Challenge, and I was going to save this project until Marchintosh but I got carried away: I am making a 3D game for Mac OS 9 (and potentially 8) using the infamous Quickdraw3D RAVE API. I’ve been wanting to do something in RAVE since a few years back and now is the...

An ItsyBitsy 16mhz 5v with a binary I found online. I haven’t even soldered the resistor so it’s a bit finicky but it works most of the time. Sometimes the keyboard dies and I have to reconnect it.

I found this guide when needing to remap a key on my AEKII that uses a DIY usb-adb adapter. The method should work for any keyboard: https://web.archive.org/web/20000621042449/http://207.208.148.74/12-27-99.shtml

I was recently gifted a 2003 Acer TravelMate 290 to use for windows 98 game development, but sadly it does not support D3D hardware acceleration under Windows 98 with the only available drivers for the integrated GPU, Intel's own drivers. It has an 855GM chipset. Acer's official drivers do work...

My problem was not on the CPU, I don't know the name of the component. It had a big grey aluminum heatsink, in the center of the logic board. The CPU is to the left of that component, and mounted on the bottom side.

You could have the same problem as I did then, busted BGAs.

The battery was not the culprit. I tried with 3 new batteries and it didn’t work. Pressing on the BGA with a few kilograms of force helped, but only for a few seconds.

I was not able to fix it with a heat gun and flux.

It wasn't the caps. Most likely it is one of the big BGAs on the logic boards that is failing.

Quick update: I was reading the wrong manual. I found the correct one, for the Summer 2001 editions of the iMac G3. In the correct manual, it instructs you to check voltage at C4 instead of C10. The voltages are -1.2V when plugged in but powered off, and +25V when powered on (expected +21V). It...

I just now verified again that the indigo logic board will boot fine within the graphite case, with either DCO, with images showing up on the CRT.

But does it make sense that that one would be broken if it works with another logic board?