Search results

according to an old website, the AT power connector part number is MOLEX 15-48-0106 X2

idk why, but something tells me it's similar to the motherboard connector for IBM ATs

this could be the solution I need for a Thirtieth/fortieth anniversary macintosh, I'm planning on building a sleeper PC with a mini PC with a 9 inch touch screen inside a macintosh classic chassis

SE/30's are picky about their RAM, but also make sure there are good connections between the CPU, ROM, and RAM

I'm pretty sure macs only accept EDO memory, they might not like FPM, and parity doesn't matter

that's an indication that the power supply is being short-circuited, so I'd say check the board for shorts and try recapping it

try reseating the ROM, or try putting deoxit on the RAM and ROM sockets and see if the behavior changes

This might only apply to the Macintosh Classic analog boards, but there might be a potentiometer to fix these voltages, but I'd also recommend checking the resistors and seeing if their resistance matches their markings

did you put MODE32 in the extensions folder?

I'm pretty sure MODE32 can only be run on system 7.1 and never, as older versions don't have support for 32-bit addressing, afaik

Rifa capacitors can be replaced by any X or X2 rated capacitors

just let them air dry, do not heat up the boards, as the solder could melt and ruin stuff

I have four additions, two G4, and two G3. Let's start with the laptops, shall we? iBook G4 14" (A1055, EMC N/A, 933MHz), 0x80010303 iBook G3 clamshell 12.1" (M2453, EMC 1847, 300MHz), 0x00088300 iMac G3 400 DV (M5521, EMC 1821, 400MHz), 0x00088300 iMac G4 800 15" (M6498, EMC 1873, 800MHz)...

It might just be pickyness with my LC III, I did overclock it from 25MHz to 33MHz, though that might not be the case

if you have a multimeter with a continuity or diode check mode, use that to check to see if you have any shorts, comparing the pinouts to the pinout of the cable

you're welcome, let me know when you fix it

Ok, with the standard driver, it loaded flawlessly, so I have no idea what is causing the address error on the universal extension

I actually need a link to macintosh repository or macintosh garden as I use an ibook g3 to transfer software to my LC III

yeah I'm down

then why did it give me an address error before loading on my 030 Mac?