Search results

You have to use a null modem adapter with it, I believe

so maybe the SwapMMUMode calls are the key to making the iie card work with 32-bit addressing enabled, at least on 68k machines

the LC PDS slot is 24-bit anyway, so how would it be able to tell the difference?

I think the goal might be to be able to use this card on Mac OS versions that require 32-bit addressing, and even to be able to use it on PowerPC machines that have an LC PDS slot (like the 6200 series)

I think the only thing preventing it is the RAM on the iie card itself, where half is used by the Mac side, and half is used for the iie card itself. But it would require a disassembly of the code, or a complete rewrite of the program from scratch

I think it's because in normal cases, you shouldn't be able to write to the ROM on the Macintosh, and the ROM drive in the ROMinator is mapped to ROM space, and thus, it can't be written to. I suggest using a floppy emu or a SCSI drive to run MacPaint on, but do not attempt to save to the ROMinator

The Born Again installer can do the patches for Mac OS 8 automatically if a Mac OS 8.0 or 8.1 CD is inserted and detected. I used it on my LC III to put 8.1 onto it

the composite out is supposed to be Component aka YPbPr, which supports higher resolutions than composite

hell yeah, send them to me on reddit (u/technomlp on there)

are those custom?

All G4 Macs will work if you remove the PRAM battery, just the date and some other settings won't save properly but it should be fine for the most part

There’s an edge in the fpu that looks like it’s two edges, that part of the socket will have two edges as well indicating pin 1

I know that, but that was toward the end of the LC III’s retail life, and I have one of the earlier models

The part I’m amazed at is that they’re using the same case mold as the LC III instead of the III+

I know that siliconinsider sells some as well, I'm not sure if he has that capacity, but I know he has a lot of vram and ram for powerbooks

it should probably draw the same amount of power as an 030 because it's just a standard 603, but I may be completely wrong

I'm actually going to be using a 62xx desktop board in a color classic, and I know, at the very least, there's a 3.3V regulator on the board, so would a stock analog board work?

the rominator SIMM is known to be slightly thinner than the standard ROM SIMM, so adding some solder to the pins might be a good idea, just be careful not to bridge any pins in the process.

would this work for a takky mod?

SE/30 boards and SE boards are interchangeable I believe, just like the boards between the Classic and Classic II are