Search results

Where's the problem? 😁 Seriously though, I would use an emulator to switch back to your old system folder and then look for a 4mb memory expansion like @eric described.

Looks like it worked. I'll either need to enable remote administration with cupsctl or set up an SSH tunnel to access the web administration page from another computer on the LAN (no browser or windowing environment on the PI), but it appears to be running: pi3bplus:~ $ curl localhost:631...

I pulled that image, but looks like it's amd64 architecture and I'm on a Pi (arm). No worries though, I'll just wait for it to make its way to Docker Hub. I'm in no hurry to print...just wanted to make sure I wasn't doing something wrong (y)

@rdmark I went to try out the printing support with CUPS. The documentation for the Docker image says that the CUPS web interface should be running on port 631, but I don't seem to have anything running on that port. I'm using the host networking driver, so I shouldn't have to forward any...

I used the Netatalk Docker image and didn't enable the "INSECURE_AUTH" environment variable. So, looking at the Docker image's entrypoint script: it looks like my uam list is: uams_dhx.so uams_dhx2.so uams_randnum.so Where would I check the version of the AppleShare extension? Is this what...

I went this route and it's working beautifully. All of my Macs back to System 7.1 can now access my Synology NAS using a Pi running Netatalk4 as a bridge (y)

I've had success with submerging the metal chassis parts in this stuff...a better alternative to sanding: https://www.evapo-rust.com/

If you get it working and want to max the RAM, I can confirm that this 16MB kit works in the MicroMac MultiSpeed: https://www.tindie.com/products/siliconinsider/purpleram-16mb-4mb-x-4-30-pin-dram-simm-kit/

It is, but what little info I've been able to find on compiling your own kernel for it makes it sound like more trouble than it's worth. Maybe I'll just run Netatalk on a Pi and have the Pi mount the NAS storage via NFS 🤔

I have a Synology DS220+ NAS that was running Netatalk 3 out of the box, but it doesn't play nice with some of my older macs (system 9.2.2 can see it, but system 7 can't). I recently decided to try turning off the built in AFP support (Netatalk 3) and install Netatalk 4 using the docker image...

Depending on how many of the custom ICs are hosed, this could be a fun project: https://github.com/kr239/Macintosh-Classic-Reloaded?tab=readme-ov-file

Mine with the 50Mhz oscillator is running the CPU and FPU at 25Mhz: Both the CPU and FPU clock pins are connected directly to the output of the flipflop IC next to the oscillator, so the flipflop is halving the frequency. That implies that, unless there were significantly different board...

I'm curious how you arrived at this mapping? I'd always just assumed the CPU was being run at half of the oscillator's frequency, but I've never verified that with a scope. I did find the below photo (not mine) of a MultiSpeed with a 40Mhz oscillator though, and 40/25 and 50/32 are similar...

Is R102 connected to the oscillator's ground pin? I can't see if there's a trace in that gap there. Mine doesn't even have R102...looks like a pulldown resistor on the oscillator's output? Yours looks newer than mine...

Do you have an SE you can try it in without the adapter boards for the Plus, just to verify the problem is on the accelerator itself? My Multispeed (that's my video :) ) had some cap leakage, but surprisingly the two data line continuity breaks I found were bad vias that weren't really near...

I just picked up this wonderful thing at VCFMW from @zigzagjoe Time for some shenanigans before doing something more practical with it... The Carrera CP allows on-the-fly switching between the Carrera and the DiiMO...

This is the user's manual and quick reference sheet for Connectix Compact Virtual 3.0 as distributed with many compact mac accelerators that had onboard SIMM slots for additional system memory.

That's a great idea!

I drove up from Pittsburgh this year with my wife and a friend (first VCF for both of them), and we all had a blast. It was great meeting everyone and just geeking out for a couple days. My wife and I won't be home for another few days as we continued up into Wisconsin to see family, so I...

Noodled around with an oscilloscope with the stacked LCII accelerator/NIC. Seems like this accelerator (and likely others) assume an expansion card won't ever be present. With the accelerator installed, the /PDS.AS line is never asserted. If I'm understanding things correctly, the LCII logic...