Search results

Interesting. Might explain why the MP-F75W I have installed in an A9M0106 case doesn't eject disks, either via the button or via the Macintosh finder when connected to a Mac.

Yep. Letting a friend of mine work on the IIci, since he has the soldering tools necessary to do whatever is necessary to get it fixed. The IIgs needs some drives, a memory expansion card, and a monitor to be complete.

Picked up a RasterOps 8/24XLi video card off the 'bay for $58.50, plus ship and tax. Have it installed in the C650 for now, even though that machine does 16 bit color natively. Eventually, it'll go into the IIci, once that computer's Nubus slots are functional again. Next weekend, probably...

BTW: welcome to the asylum, Dustin. Glad you finally made it over here.

You can also just roll over the title of each thread on the New Posts page, which gives you an excerpt from each thread. No, it won't show an excerpt of whatever new post is in a thread, but will give you an idea as to what the thread is about.

That's cool. I'll have him keep his eyes peeled on the store's page and await your update.

@ScutBoy Notified a friend of mine who lives in St. Paul. He may drop by to buy one of the SE machines. Has been wanting one for a few months, once he saw a photo I sent of mine. Apparently, one of his family members had one for a few years, but got rid of it instead of passing it onto him.

ROFL, best comment I've seen about that pic...

Most of you have already seen this, over at the 68kMLA forums. One of the SE/30s from my September 2012 Conquest. Tadiran that decided to Maxellify itself and blow its guts out. Yes, the holder was loose, as seen in the attached potatocam image below.

Chip-wise, the later Apple 5.25 disk controller card is identical to the older 650-X104 disk ][ controller card. Only difference is the fact that the "DRIVE 1/2" headers are tied into the soldered-on ribbon cable with the DB-19 connector.

The IIgs upgrade kit was offered through at least 1989, btw. Maybe longer, but, there was less demand for it after the ROM 3 IIgs board came out, since an upgrade kit machine didn't have the upgraded memory, nor the upgraded ROMs. Also, the upgrade kit did not come with a memory expansion...

Time for a new pic, now that the "dead" MB is alive again... Anyway, nice score.

^Most likely. Also, all of the 0173-A boards I've seen have had the //e connectors preinstalled, so they were the universal IIgs boards that could be used either in an actual IIgs or in the upgrade kit for the //e.

Does the drive seem to make a "skrrrick" noise, then do nothing other than spin up? If so, you might try the board from another known-working ELS170S drive. Possible that something got fried on the board, which is what I suspect happened to the LPS240S that used to reside in my Centris 650...

You can also choose "Put Away" or command-Y in System 7... Does the same as dragging the floppy to the trash can icon.

Another option is to take an external hard drive or CD-ROM case, then install the drive in that. Use a normal HDI-30 to DB-25 SCSI adapter and a DB-25 to 50-pin Centronics cable with terminator to connect the drive to the PB.

@vorg Oops... Maybe a small pair of needlenose vise grips clamped onto the head of the screw will loosen it. If you can get the red stripe cable, it might be worth trying the other drive in the Plus and see if it finally works properly. If it does, then you can take your time on fixing the...

With respect to the different cables, the ones used with the Super Serial card are different, since one is meant for the Apple Personal Modem (or for hooking up a non-Apple modem to a Mac or IIgs), and the other is meant for printers, like the IWII and the StyleWriters, etc. The DB9 to MD8...

The newer drive (one on the left) may need a different cable. Some of the earlier drives use a yellow stripe cable, which isn't pin compatible with the later drives. The later drives need the 590-0167 cable with the red stripe. That may explain why it continually ejects. With respect to your...

Apple uses only one Mini-8 DIN cable for both printer and modem functions, so no rewiring necessary. As long as you aren't planning to use the setup with a Super Serial card, you won't need anything but the Belkin cable and one of the extension cables from the other auction.