Search results

All is good, thank you for the response. I will mess with making short the larger components and see what that does.

I wanna thank yall for the replies! Im still fairly new to the vintage computer hobby but loving every bit of it!

New update: I replaced DF2 but this time with the 1.3W (Izt=25mA): BZV85-C8V2,113 diode and the noise seems to have gotten a lot better, it just has a very faint noise now. I did also go ahead and add a second 1N5355B 5W 18V Zener for DL21/22 which was not needed per the mentioned forums but...

I just looked at where the shielding was touching the grounds and just made sure they were touching the shield. I don’t believe this is the issue as I never messed with shield prior, I was just bending some of the tabs under the were analog board bottom metal sheet touches. Most were touching...

I was unfortunately unable to fix it, I do believe the noise isn’t as loud anymore but the ground is there, I can check it with the multi-meter

I checked them over with the multimeter and everything is checking out without any bridges

Update: So messed with some of the metal shielding and the noise is definitely lower now, gonna mess with it some more to hopefully fix it

I’ll double check but it looks weird in the photo but I did make sure their was no bridging.

I will look into this

Yea sorry, I meant to say diode.

Picture of the analog board.

Hello, I recently got a stock color classic, it was in working condition, I recapped the analog board and logic board and everything still worked. I followed this forum to replace some resistors that get hot. I replaced RL62, DL22/DL22, RL22, and RF11. When I replaced DF2 with a 5W...