Broken video connector on LC

[Scout]

Repairing an LC logic board with a bad 15 pin video connector. Can these be sourced or do I need to rob from a bad board? The only bad board I have is for a Quadra 700. Visually it looks slightly different. Do I need to find a bad LC board?
Computer booted and runs fine. I was planning on recapping but this connector was loose and unreliable. I removed it. If I cannot source the connector easily I may put this project on the back burner.

 

[eric]

I believe one of these would probably fit - Please review the data sheet before you purchase though to ensure the footprint matches the one you have on the LC. Search for dsub standard 2 row 15 pin female - might be able to find em on Amazon or eBay too if you dont have anything else to order from mouser/digikey.

https://www.mouser.com/c/connectors/d-sub-connectors/d-sub-standard-connectors/?contact%20gender=Socket%20%28Female%29&gender=Female&mounting%20angle=Right%20Angle&number%20of%20positions=15%20Position&number%20of%20rows=2%20Row&termination%20style=Solder&instock=y&sort=pricing

 

[Scout]

Thanks for the quick response. I really don;t want to part out the machine. Everything looks good except that part. First time I have run into that. For some reason the ground connectors to the lugs were missing. Not sure why. That is what made it loose.