Latest activity
-
CClassicHasClass replied to the thread Eric's Apple Network Server 700 tinker log.It's just an HD44780-style controller, no dot-addressable graphics. I'm not sure what's going on there, but it acts like there's...
-
Any idea what could cause this? What should I be looking for? PSU issue? Analog board? I don't really know where to start. I removed... -
Jjoevt replied to the thread Eric's Apple Network Server 700 tinker log.Is there an Apple document that describes the hardware of the ANS 500/700? Found this...
-
Jjoevt replied to the thread Eric's Apple Network Server 700 tinker log.Does lcdstring have a man page? I would create a new utility that writes directly to the command and data registers like the Open...
-
JJerithjdf replied to the thread Mac LC 575 Analog Board Recap Guide Photos.Thank you! It looks like yours is missing the little sticker that has the revision # on it, just says "place label here" LOL. I did go...
-
Ddougg3 replied to the thread Mac LC 575 Analog Board Recap Guide Photos.For what it's worth, I recapped my Macintosh TV's analog board (also "630-0355-") back in 2013 and CP14's orientation matched your...
-
-
0dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).Have you found this for Reels scanners? -
WThis is a bit of a work in progress, but I’ve found a 10000mAh powerbank that fits inside the empty battery pack. Amazon Link With the...
-
-
0dan0 replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).One suggestion is to try https://www.forward2me.com/ to get you a UK mail address, that would then forward on to the US. Yes the...
-
Deano replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).Thanks for your advice. I got the firmware working (type C) and did some before and after comparison. The bitrate improvement is... -
eric replied to the thread Eric's Apple Network Server 700 tinker log.When I tried spaces to wrap i just get a triple line char at the end and nothing on the 2nd line. Ok fresh install again. I selected...
-
