Latest activity
-
Oomega replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).CDenhart Thank you for trying to help me. I've tried the firmware from the link before. Some didn't work and left only red spots on the...
-
I just finished restoring my Macintosh Classic (new caps, retrobrite case). It's working perfectly minus one thing... the floppy drive...
-
phunguss replied to the thread DIY Desktop Video Microscope #2 for Micro Soldering.Here is a Penny and circuit board to compare. Penny close up Circuit board wide and close up I think that is pretty good for $6. -
-
Jjasperman replied to the thread G4 Cube VRM.Thanks indibit! Do you have a surface mount soldering set up with a hot plate? Or did you manage to make these modifications with just a...
-
TThePhage replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).I have had such skipping and sounds on film that shrunk over the decades and doesn't align well with the advancing mechanism. Not sure...
-
rdmark replied to the thread Looking for beta testers: Netatalk and SQLite.Netatalk 4.3.0 was released today. It includes the new sqlite CNID backend. It is still flagged as experimental, and should only be... -
CCDenhart replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).There is original Version C firmware linked in the lookup tool page from the first post, in the path "Option 3 - Original Firmware for...
-
phunguss posted the thread DIY Desktop Video Microscope #2 for Micro Soldering in Soldering and Repair.Granted if you can find the right parts, there is NO Maths or calculations needed for this method. No 3D printing. Parts: - Old...
-
-
Oomega replied to the thread Modding the Kodak Reels 8mm Film Digitizer (Firmware Hack).Hi, my Kodak is probably very bad. Even the color film started to skip. It makes a strange clicking sound when scanning and at that...
-
Iindibil replied to the thread G4 Cube VRM.Hi everyone, I'm sure you're already familiar with this link, but it's a cheap and easy modification...
-
-
Iindibil replied to the thread 120GB SSDs in G4 Cube.Hi, I found this forum thanks to @JDW. You've already provided many solutions, but I'll briefly share my experience. I have SSDs in all...
