Latest activity
-
JDW replied to the thread Cracked Hinge on Mac Portable.Silly me. I didn't realize what that rectangular hole was for until I put on the rear drive-and-battery-bay cover! The little... -
-
PP-car replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).OdanO. thank you so much. I'm going also print the parts for the lens MOD. can you suggest a good online 3d print store. I've not done...
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Print your own if you can https://www.stlfinder.com/model/super8-to-normal-reel-adapter-ovQWakM0/2572373 -
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Framing is likely working after the reboot.
-
MMk.558 replied to the thread Getting Quadra 950 connected on the internet.Can you elaborate more on this? In addition, a Ethernet to WiFi bridge may not be what he's looking for. If he wants to download some...
-
PP-car replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Darn. My unit did not come with the adapters. what are they called? maybe I can find them on AMAZON. If I cant find on AMAZON, where can...
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).That is not the adaptor. The red and grey posts are just classic 8mm style reel hubs. You need to attached this over the red post:
-
-
PP-car replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).My Kodak Reels arrived today with the red adapter attached to the left arm and the grey one attached to the right arm. However, my super...
-
-
PP-car replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).so, I just got my Kodak Reels and was able to get OdanO's firmware up and running. However, when I try to use the "framing" buttons...
-
Jjoevt replied to the thread Viability Of Transplanting A PowerMac B&W REV. B's Fixed IDE Controller Onto A REV. A Board?.B&W G3 Yosemite REV C schematics at: https://www.macdat.net/repair/apple_schematics.html The pages are not in order and it's not OCR'd...
-
Kai Robinson replied to the thread Viability Of Transplanting A PowerMac B&W REV. B's Fixed IDE Controller Onto A REV. A Board?.@XodiumLabs has done this, the CMD 642 is a direct pin compatible replacement.
