Latest activity
-
sunvalleylaw replied to the thread Starting my Compact Mac Vintage Journey with this SE modded to SE/30 project..This should get here Thursday! -
sunvalleylaw replied to the thread New to Me - Power Macintosh G3 Beige Desktop – 266MHz – 224MB RAM – 6GB HDD – Mac OS 9, project.Did some futzing and figured out prior owner installed an ATI Rage 128 with a VGA port from a newer G3. Which was good because I chose...
-
-
Iindibil replied to the thread Macintosh LCII failure.I did another test. I was testing it with a dead battery (0.5V), and I tested it with a new battery (3.5V), and with both I get the same...
-
phunguss replied to the thread Macintosh LCII failure.It is hard to tell with your pic, it is a little out of focus. Take a couple more close up shots of the capacitor farm on the bottom... -
Trash80toG4 replied to the thread 2026 PowerPC Challenge, is it happening?.GAAAAAAAAAAAAAAH!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :eek: Accursed MDD'03 just took another step backward on day twelve! USPS... -
Iindibil replied to the thread LC II vs. 4MB SIMM Problem.Hi. Many years ago, in a MacWorld magazine, there was a story about a guy who converted an old Macintosh into a PC case because it had...
-
IHi, I recently got an LCII that wouldn't boot. I recapped the power supply, and after that, the LCII powered on, but there was no chime...
-
-
TThePhage replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).@Deano, I agree 1000% with Videodoctor. Please consider putting that lens mod write-up as a Resource (Article). You can do that here...
-
Certificate of Excellence replied to the thread What's the best way to fix a stripped-case screw hole?.If it were me, I’d try and use a slightly larger screw or drill out the existing hole to fit a slightly larger screw size.
