Latest activity
-
Please can you read through and vote on the following proposition for changes to the board structure by clicking here.
-
Ccoisasdavida replied to the thread LC III Dyna Corp PSU - 0V = bad C9.Found this: https://68kmla.org/bb/threads/lc-lcii-lciii-q605-dyna-comp-dcf-353-power-supply-woes.35646/ Will replace C9 and report back.
-
Pphipli replied to the thread Drop-In G4 CPU transplant: To G3 B/W from G4 Yikes possible?.Hum, so a little bit of info on the Sonnet cards - they actually ignore the CPU clock multiplier and just do their own thing, so that...
-
Deano replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Dumb mistake on my part. I made the channel between the two walls of this design too narrow for the film to pass through. It's been... -
CChrisTheChiller replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).ah, I nearly forgot one little bug with the firmware. I have a 32 GB and a 64 GB sd card for capturing, both are from Kodak. whenever...
-
PentaxEnthusiast replied to the thread PowerFox - new web browser for Leopard on PowerPC!.I don't have anything that can run this (yet!) but this is awesome to see! -
CRecently given to me was a Performa 450/ LC III plus a Performa Monitor. Monitor is fine. Performa is completely dead. I removed the...
-
CChrisTheChiller replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).hi everyone, after flashing the overwhelmingly awesome modded firmware, I came up with a hardware-modification on my european Reels...
-
-
CFor me it all started with a Macintosh SE 30 back in the early 90s. Then a LC II.... Have used Macs for this long. Recently I was given...
