Latest activity
-
Board Nominations
Nominations have now closed and the results are available here. -
Hey Guest, MARCHintosh 2026 is upon us. Check out community projects, join GlobalTalk, and have fun!
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).It is possible that some of the jitter can come for the film being pulled too hard, however not all, as it can happen with no pulling... -
MMark_W replied to the thread (2) Macintosh SE/30's - Full Restoration.Hello @GreenBar0n, I have an se30 motherboard behaving just like your first one. Leaked capacitors didn't cause any damage but it was...
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Thank you. Added the bug report to the repo.
-
Ccoisasdavida replied to the thread LC III Dyna Corp PSU - 0V = bad C9.Found this: https://68kmla.org/bb/threads/lc-lcii-lciii-q605-dyna-comp-dcf-353-power-supply-woes.35646/ Will replace C9 and report back.
-
Pphipli replied to the thread Drop-In G4 CPU transplant: To G3 B/W from G4 Yikes possible?.Hum, so a little bit of info on the Sonnet cards - they actually ignore the CPU clock multiplier and just do their own thing, so that...
-
Deano replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Dumb mistake on my part. I made the channel between the two walls of this design too narrow for the film to pass through. It's been... -
CChrisTheChiller replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).ah, I nearly forgot one little bug with the firmware. I have a 32 GB and a 64 GB sd card for capturing, both are from Kodak. whenever...
-
PentaxEnthusiast replied to the thread PowerFox - new web browser for Leopard on PowerPC!.I don't have anything that can run this (yet!) but this is awesome to see! -
CRecently given to me was a Performa 450/ LC III plus a Performa Monitor. Monitor is fine. Performa is completely dead. I removed the...
-
CChrisTheChiller replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).hi everyone, after flashing the overwhelmingly awesome modded firmware, I came up with a hardware-modification on my european Reels...
-
