Latest activity
-
Please can you read through and vote on the following proposition for changes to the board structure by clicking here.
-
Arbystpossum replied to the thread 6500 Heatsink Upgrade Question.I actually don't know. I didn't put a meter to the pins, but I vaguely remember plugging in a fan into the pins on mine, and no... -
BBrutus75 posted the thread G4 Digital Audio 22 pin power supply recap in PowerMac G4, iMac G4 & eMac.Hi Guys, I have an acbel api-9841-320 rev b PSU (22 pin) in my G4 Digital Audio that I suspect needs recapping. Anyone have a cap...
-
Jhogs replied to the thread 6500 Heatsink Upgrade Question.The fan that was on mine was in the two pin header at J17. Do you happen to know what the three pin header is for at J7? -
Arbystpossum replied to the thread 6500 Heatsink Upgrade Question.I have a Commslot 2 Ethernet card in mine, so it's off to the side. The heat in my machine was a nightmare to manage, but I have it...
-
Llarryc39 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).After a long long time...I finally have my C-unit modded! I installed a new 18mm spacing M12 lens mount, plastic, and the extension...
-
-
CChrisTheChiller replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).those nylon washers definitely are a nice solution and surely are pretty easy to aquire anywhere 👍
-
CChrisTheChiller replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).I totally agree, who could be a real tinkerer without loving overkill? :D I was able to get a broken super8 editor on ebay. nobody...
-
-
MMark_W replied to the thread (2) Macintosh SE/30's - Full Restoration.Btw this should be the correct position for t2 marker, to measure the end time of a complete cycle: Assume 50% duty cycle, the...
-
-
I'm having two strange issues with my Sharp PT-9000: I can't get a good read from the resistive touchscreen, and the serial port sends...
