Latest activity
-
wells replied to the thread Macintosh Mini - (yet another) Maclock conversion project.It looks like PCBway will print the STL for this project in PLA (or any other FDM filament) whereas JLCPCB has a 30x30mm minimum.
-
Mark (Millennium Macs) replied to the thread IIci PSU - Dead as a Dodo.I think I had to leave 2 due to not having stock, one was the small guy on the vertical daughter-board, the other was a 4.7uF I didn't...
-
JDW replied to the thread Macintosh Mini - (yet another) Maclock conversion project.@wells Have you put your STL files through the JLC3DP website to see if the size is large enough for them to do a PLA print? They have... -
Jjoevt replied to the thread Apple Network Server MacOS based ROMs found.Right. ANS 2.0 ROM will use the AAPL,9500 identifier even if it detects itself to be an ANS machine. An ANS machine (whether using ANS...
-
Jjoevt replied to the thread Apple Network Server MacOS based ROMs found.The PLSCCPort property is set by ANS 2.0 Open Firmware. It is not set by any other version of Open Firmware. 1 is for ANS 7 is for TNT...
-
CClassicHasClass replied to the thread Apple Network Server MacOS based ROMs found.I've been looking at the Ethernet issue some more. DumpNameRegistry shows two differences for /Devices/device-tree/bandit/gc/mace: 2.0...
-
wells replied to the thread Macintosh Mini - (yet another) Maclock conversion project.DM me your address and I'll send you a few.
-
Mike's Future Retro replied to the thread Macintosh Mini - (yet another) Maclock conversion project.I’m on my way to doing this project. I ordered 5 of your adapter boards from pc way. I just need to find some one who can 3d print a... -
roymaya replied to the thread Mac Classic II - System 6.6.0.8L is supported but that's for the asian market. I tried running just the regular 6.0.8. When you boot up to ti you get a message... -
Trash80toG4 replied to the thread TwinSlot for 6360 & 5x00 tests being done IRL. 8+ years long project draws to a close!.Looks like whichever side of the cable above facing upward will need to be filed/sanded/whatever to get the housing/cover's profile down...
