Latest activity
-
eric replied to the thread BlueSCSI v2 Pico - Low cost, open hardware, fast SCSI device!.From jflitton https://github.com/jflitton/daynaport-scsilink-linux-driver
-
TSo I understand that 72 pin SIMMs use the /RAS signals to distinguish between and separately activate different banks. How is this done...
-
JDW replied to the thread Portable CCFL Backlight Replacement with Off-the-shelf LED Strip Driver.Noise suppression of ceramic caps is sometimes done by drilling holes in the board around the cap so the PCB won't act as a speaker... -
-
techknight replied to the thread Color Classic analog board re-design, needs community feedback..Thats only slightly high but its not too far off. It also needs to be under a load from the flyback producing HV before you can really... -
Jjonschultz replied to the thread Color Classic analog board re-design, needs community feedback..Sounds almost like it's in high-res mod mode, but I assume that's not really the case. :) Have you looked at pot PP1? I don't think you...
-
David Cook replied to the thread Portable CCFL Backlight Replacement with Off-the-shelf LED Strip Driver.Not certain. But, I agree with you that noise can be a showstopper. For example, all of my recent PCs have beQuiet cases and fans. -
JDW replied to the thread Portable CCFL Backlight Replacement with Off-the-shelf LED Strip Driver.@David Cook Are you 100% certain its the coil and not the cheap ceramic caps? The expand and contract in some circuits, and like a...
-
David Cook replied to the thread Portable CCFL Backlight Replacement with Off-the-shelf LED Strip Driver.I just tried it. I drowned the coil in superglue and let it sit for an hour. It is dry to the touch. Unfortunately, the coil whine is...
-
I picked up a Sun SPARCstation IPX at VCF SW, and I'm having trouble getting the computer to power on. I recapped the power supply, and...
