Latest activity
-
EEradicator replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Ok, I did the lens swap/mod and I am on the firmwre "D" mod. But now I cannot zoom out enough to see the entire frame and sprocket...
-
MMark_W replied to the thread Color Classic analog board re-design, needs community feedback..If HOT is not shorted and CRT PSU does not enter protection mode after it tried to start initially, then the fault might not be in the...
-
-
AArjenCNX replied to the thread Color Classic analog board re-design, needs community feedback..okay now i have checked the board one more time, and i cannot see any errors there anymore, i did fix 2 connections before, now i have...
-
Kai Robinson replied to the thread SPARCstation IPX power issues.This might be a question for @This Does Not Compute ! -
Ttrag replied to the thread Bank Distinction on PMX500 and 7200 DIMM?.I wonder if this is an artifact of using the same ROM on both the PowerSurge and Catalyst machines. PowerSurge doesn't support...
-
Many of you are already aware of Phil Greenland's Github project where he uses ATTiny85 to replace the RTC (Real Time Clock) on SE/30... -
-
Jjoevt replied to the thread Bank Distinction on PMX500 and 7200 DIMM?.Maybe the hardware allows it. I don't think the ROM HWInit memory detection routines for Platinum might not. I've attached startup...
-
HHook Line and Tinker replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).@StevieB I'm new as well and the experts will jump in with an answer but since the stock firmware is available for A, B, C, and D...
-
Ttrag replied to the thread Bank Distinction on PMX500 and 7200 DIMM?.Looking through the Hammerhead and Platinum documents carefully, they strongly suggest that banks are controlled on a /RAS basis...
-
SStevieB replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Hello Tinkerers! Like some on here, I'm a 'newbie' who has just bought a Kodak Reels unit to digitise the 8mm family cine films my Dad...
-
Ttrag replied to the thread Bank Distinction on PMX500 and 7200 DIMM?.Just started reading, but the Platinum ERS document states right up front that it supports up to eight, 128 MB banks of RAM on four DIMMs.
