Latest activity
-
Ddaanvdl replied to the thread Wifi DaynaPORT on Macintosh Portable.Is this the correct Tigard programmer? https://www.mouser.com/ProductDetail/Securing-Hardware/TIGARD-V1
-
Purdy replied to the thread BlueSCSI NeXT quesiton.Sorry to revive an old thread, but I was having problems very similar problem to Michael's when I tried to install NeXTStep 3.3 on an HP... -
Ccampbellashe replied to the thread Wifi DaynaPORT on Macintosh Portable.I’m using Tigard. I’ll try to find specific ref for you. Works well with Mac and OpenOCD.
-
Ccampbellashe replied to the thread Wifi DaynaPORT on Macintosh Portable.No spare yet. The SRAM is not cheap enough. $50 for ten 512 chips, plus tariffs. My 4-8 mb variant will be even more with use of 1 mb...
-
Ddaanvdl replied to the thread Wifi DaynaPORT on Macintosh Portable.@campbellashe I’m not very familiar with CPLD programming, but I’d like to give it a try. Which JTAG programmer would be suitable for...
-
phunguss replied to the thread The Apple Lisa Inside an FPGA!.I like the AI generated images, but the ports don't match the example board photo previously posted. Without the Gerber, it would be... -
WowIndescribable replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Hi, gang. I have some lens locking rings, standoffs, and backlight masks that are surplus to requirements. I'm not in a position to...
-
-
Ccampbellashe replied to the thread Dynamic Engineering Portable PDS RAM Card.No, never found it. Will see if DTACK problems arise on my version 2 board. The CPLD route was easy to start with and scales easily.
