Latest activity
-
thecloud replied to the thread What printers are you using?.Like @billgoats , I have an ImageWriter II, but it doesn't have an AppleTalk card. It's connected via serial cable to a networked Mac... -
billgoats replied to the thread What printers are you using?.I have an ImageWriter II with AppleTalk card, which is always a delight! With both black, and colour ribbons. Then there's the... -
Froggy814 replied to the thread Troubleshooting Macintosh Portable after loading 12V line-- self inflicted..I would try everything in my power not to have to replace the PMGR. But of course, it is always a plausibility it is something else... -
Ccampbellashe replied to the thread Troubleshooting Macintosh Portable after loading 12V line-- self inflicted..Recap: After correcting the J15 power tap wiring, the Portable stopped booting. SYS_RST*/PMGR_RESET* stuck at 0V, F1 good, PMGR clock...
-
Mmmaseda replied to the thread SE/30 and Lapis ProColorServer 24 (Not 24X).I have the same board as you so I’ll be following this thread. One thing I notice in the pictures is the 24X has all the jumpers removed...
-
Froggy814 replied to the thread A Hitachi HL400 portable in the e-waste? Yes!.Wow! Cool find!
-
Seriously, I lifted the lid to have a scrounge as per usual and... Well, I found this: Even had the power brick with it! There's some... -
-
Ddaanvdl replied to the thread Troubleshooting Macintosh Portable after loading 12V line-- self inflicted..Before lifting R13, I would first check the reset input of the Power Manager MCU. Last week I repaired a Macintosh Portable with...
-
muse replied to the thread First official C64 in 36 years.Indeed. Commodore sources the case from Icomp which uses the original tooling from the 80s. I bought one years ago to replace my... -
Mmilek7 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).whoah, that helped indeed, thanks a lot!
-
eric replied to the thread BlueSCSI v2 Pico - Low cost, open hardware, fast SCSI device!.I touch on it in the blog post but akuker from PiSCSI had already done captures of the protocol and documented it on there wiki years...
