Latest activity
-
SScouter3D posted the thread Macintosh Portable M5126 - Battery problem - Good night :0) in Macintosh Portable.Hi, my name is Tom and this is my first post in this forum. I run a small online homecomputermuseum site and i repair a lot of vintage...
-
-
Elemenoh replied to the thread NeXT Computer / NeXTCube Capacitor Lists.@jktw which board(s) do you need to recap? -
thecloud replied to the thread What printers are you using?.Like @billgoats , I have an ImageWriter II, but it doesn't have an AppleTalk card. It's connected via serial cable to a networked Mac... -
billgoats replied to the thread What printers are you using?.I have an ImageWriter II with AppleTalk card, which is always a delight! With both black, and colour ribbons. Then there's the... -
Froggy814 replied to the thread Troubleshooting Macintosh Portable after loading 12V line-- self inflicted..I would try everything in my power not to have to replace the PMGR. But of course, it is always a plausibility it is something else... -
Ccampbellashe replied to the thread Troubleshooting Macintosh Portable after loading 12V line-- self inflicted..Recap: After correcting the J15 power tap wiring, the Portable stopped booting. SYS_RST*/PMGR_RESET* stuck at 0V, F1 good, PMGR clock...
-
Mmmaseda replied to the thread SE/30 and Lapis ProColorServer 24 (Not 24X).I have the same board as you so I’ll be following this thread. One thing I notice in the pictures is the 24X has all the jumpers removed...
-
Froggy814 replied to the thread A Hitachi HL400 portable in the e-waste? Yes!.Wow! Cool find!
-
Seriously, I lifted the lid to have a scrounge as per usual and... Well, I found this: Even had the power brick with it! There's some... -
-
Ddaanvdl replied to the thread Troubleshooting Macintosh Portable after loading 12V line-- self inflicted..Before lifting R13, I would first check the reset input of the Power Manager MCU. Last week I repaired a Macintosh Portable with...
-
muse replied to the thread First official C64 in 36 years.Indeed. Commodore sources the case from Icomp which uses the original tooling from the 80s. I bought one years ago to replace my... -
Mmilek7 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).whoah, that helped indeed, thanks a lot!
