IR Led and power led extending should be sufficiënt then, as you mentioned.
First things first, get the PSU going.
First things first, get the PSU going.
A takky Mac…..
- Thread starter -SE40-
- Start date
Soooo, this took a while…..
That is, before I dared to cable up the board to the PSU……(and aswell as other priorities did prevent me to move ahead)
After recap and missing the original PSU I never got to test it before.
As that PSU had an extra connector for startup control and thus never really figured out how that connected, so I thought to skip it for now.
Today I figured out the ATX connections and did connect it to the board, and it basically works!
I am happy !
Have a great Easter
That is, before I dared to cable up the board to the PSU……(and aswell as other priorities did prevent me to move ahead)
After recap and missing the original PSU I never got to test it before.
As that PSU had an extra connector for startup control and thus never really figured out how that connected, so I thought to skip it for now.
Today I figured out the ATX connections and did connect it to the board, and it basically works!
I am happy !
Have a great Easter
Attachments
@Trash80toG4 ….sure has been a while.
Thanks for asking.
Next step is still figuring out the other small PSU connector pinout to the PSU.
I suspect the minus 5 Volts is needed for sound.
Anyhow-anyway… as soon as the weather turnes bad, and the days get shorter, the journey continues.
Thanks for asking.
Next step is still figuring out the other small PSU connector pinout to the PSU.
I suspect the minus 5 Volts is needed for sound.
Anyhow-anyway… as soon as the weather turnes bad, and the days get shorter, the journey continues.
I watched the video with my wife from start to finish - was blown away by the quality of the work all around - was wondering if the outer case pieces would work in a real Mac Plus chassis...
@Kai Robinson , dont know if it would fit a Plus chassis. But I suspect not intirely as its printed with a fairly thick wall.
It does fit with the parts he chose very well.
The eye for detail and his quality finish is superb
It does fit with the parts he chose very well.
The eye for detail and his quality finish is superb