Windows NT 4.0 on the Apple Network Server (and TNT Macs)

PappaDF

New Tinkerer
Aug 4, 2026
37
23
8
This is a breakout from the thread Apple Network Server MacOS based ROMs found. Triggered by the ROM findings, bringup of Windows NT becomes a larger project and quickly takes over the original thread. To not pollute the original thread more than already done, I thought it might be better to keep Windows NT separate.

Note that AI tools have been used as part of Windows NT on ANS bringup/debugging; I know that is a red flag for some and I fully respect that; if so, you should stop reading here.

Quick update, I'm going to have to pause work right now because I have hit a pretty big roadblock after a successful Windows NT 4.0 on my 700.

The roadblock starts after the first reboot directly after Windows NT is installed on the internal drive. Just the fact that the install process is working is very encouraging.

@ClassicHasClass I posted my update here https://github.com/MrMacintoshBlog/powermac-nt-hal/blob/main/docs/ANS-HANDOFF-2026-11-05.md

@PappaDF Thank you also so much for your help, if you see anything that my AI tool is missing please let me know. We are getting close but also seem far away.

@Mr. Macintosh, see an initial assessment here: https://github.com/pappadf/powermac...ocs/2026-11-06-real-hardware-the-npfs-wall.md

I will try to prototype some more, and see if I can either replicate or mitigate that kind of potential problem
 

Mr. Macintosh

New Tinkerer
Dec 22, 2021
40
11
8
I know we can do this!

The fact that we got through initial setup and install onto real ANS 700 hardware is amazing.

Like you said @PappaDF, bringup or startup after the install is a different story.
 

ClassicHasClass

Active Tinkerer
Aug 30, 2022
577
1
329
63
www.floodgap.com
I'm not able to get this working on a real ANS 700 with either 1.1.20.1, 1.1.22 or 2.26NT. They mostly fail in the same way. Using the 1.2 floppy image, and a genuine pressed Windows NT 4.0 Workstation CD. The CD is readable from Open Firmware. The machine has 224MB of parity RAM and the CD-ROM drive is in the first drive bay.

1.1.20.1:
Code:
0 > load fd:,\boot.of 
fd:,\boot.of   ok
0 > load-base loadsize eval 
tsize=F000 dsize=1000 bsize=95000 entry=60EC90 
SECTIONS:
.text    00600000 00600000 0000F000 000000D4
.data    0060F000 0060F000 00001000 0000F0D4
.bss     00610000 00610000 00095000 00000000
loading .text, done..
loading .data, done..
clearing .bss, done..
powermac-nt-hal: reading the OEM disk into RAM (this takes a while) .........
powermac-nt-hal: B40 blocks of the OEM disk are in RAM
powermac-nt-hal: starting Windows NT Setup

stage0: powermac-nt-hal, Open Firmware in its factory big-endian mode
stage0: RAM 0x0E000000
stage0: Bandit at 0xF2000000
stage0: Bandit at 0xF4000000
stage0: device tree taken, 0x00000035 nodes, 0x00014E16 bytes
stage0: switching to little-endian mode (until the next reset)

Arcfw 0.1: ARC firmware for the Apple Network Server (powermac-nt-hal)
arcfw: little-endian since stage0; Open Firmware left in its factory mode, nothing in NVRAM changed
arcfw: system parameter block at 4000, 37 vector entries
arcfw: configuration tree built
arcfw: booting 'multi(0)scsi(0)cdrom(0)fdisk(0)\PPC\SETUPLDR'
arcfw: cannot open 'multi(0)scsi(0)cdrom(0)fdisk(0)\PPC\SETUPLDR' (14)

arcfw: fatal: cannot load 'multi(0)scsi(0)cdrom(0)fdisk(0)\PPC\SETUPLDR' (ARC status 14)

arcfw: stopped.  Open Firmware is not there to return to: reset or power the machine off.

1.1.22:
Code:
0 > load fd:,\boot.of 
fd:,\boot.of   ok
0 > load-base loadsize eval 100c000, unknown word
 ok

2.26NT:
Code:
0 > load-base loadsize eval 
tsize=F000 dsize=1000 bsize=95000 entry=60EC90 
SECTIONS:
.text    00600000 00600000 0000F000 000000D4
.data    0060F000 0060F000 00001000 0000F0D4
.bss     00610000 00610000 00095000 00000000
loading .text, done..
loading .data, done..
clearing .bss, done..
powermac-nt-hal: reading the OEM disk into RAM (this takes a while) .........
powermac-nt-hal: B40 blocks of the OEM disk are in RAM
powermac-nt-hal: starting Windows NT Setup

stage0: powermac-nt-hal, Open Firmware in its factory big-endian mode
stage0: RAM 0x0E000000
stage0: Bandit at 0xF2000000
stage0: Bandit at 0xF4000000
stage0: device tree taken, 0x00000036 nodes, 0x00014EA8 bytes
stage0: switching to little-endian mode (until the next reset)

Arcfw 0.1: ARC firmware for the Apple Network Server (powermac-nt-hal)
arcfw: little-endian since stage0; Open Firmware left in its factory mode, nothing in NVRAM changed
arcfw: system parameter block at 4000, 37 vector entries
arcfw: configuration tree built
arcfw: booting 'multi(0)scsi(0)cdrom(0)fdisk(0)\PPC\SETUPLDR'
arcfw: cannot open 'multi(0)scsi(0)cdrom(0)fdisk(0)\PPC\SETUPLDR' (14)

arcfw: fatal: cannot load 'multi(0)scsi(0)cdrom(0)fdisk(0)\PPC\SETUPLDR' (ARC status 14)

arcfw: stopped.  Open Firmware is not there to return to: reset or power the machine off.