Search results

I do like the hybrid version with the twiggy version of the Lisa badging. Unfortunately, not enough to justify the cost. To be fair, I think the cost is justified, I'm sure a lot went into the design and manufacturing... I am hoping that 3d printing on demand eventually gets good enough...

It looks like in the 6100 picture that the bottom section by the HDI-45 port is not centered on the connector. If you center it, it looks like it will overlap, or be very close to the screw hole that I need to use for securing the DOS car adapter bracket. With the hope of 3d printing a case...

It looks like in the 6100 picture that the bottom section by the HDI-45 port is not centered on the connector. If you center it, it looks like it will overlap, or be very close to the screw hole that I need to use for securing the DOS car adapter bracket. With the hope of 3d printing a case...

For the 3 pieces in their black resin, it was ~ $11 USD For transparent, it was ~ $14 Shipping and tax for all 6 pieces was $13 So $38 for all 6 delivered to South Carolina.

Yeah, maybe it was something in the checkout, but I ordered the mouse case in transparent last week. This week, it is not showing up. Translucent is the only option. :(

Decided to only notch in the one side, as it gives more room for double sided tape, and also gives me enough bare PCB to punch another hole for mounting the case. Also added some white circles around the minimum pins that need to be connected to have it work and not allow for plugging in wrong...

Appreciate the clarification. I always have used DB-15 vs DA-15 as what I thought was a technically incorrect but accepted usage. Good luck finding a DA-15 cable searching google. But I will be sure to use the proper connector identifier from here on out. Ah, you are correct. I need to...

If you have the chance, can you get a measurement from the farthest left pins of the HDI-45 connector, to where the fan fin bump outs start? My current VGA design extends 14mm left of the leftmost pins. Wondering if the will be enough. The other option that might alleviate the need for all of...

OK, I tested it out. Not sure how anyone got a Houdini II card to fit with the lid closed. I suspect they removed the card guides on the underside of the lid, as on mine, the little slot that I believe was there to help stabilize longer boards hits the board and the lid will not come close to...

Yeah, unfortunately, my filament printer can't come anywhere near the quality of a resin print, and I don't really want to purchase one and deal with all the chemicals and processing. Also, when I can get one printed in resin for ~$20, it doesn't even make sense for me to buy a resin printer at...

Added to my To-Do list!

Ah, sadly no, just a footnote in this post. Used the same paint as the G3 all-in-one. I've not done a great job documenting because I'm a bit overwhelmed with projects at the moment. Spending lots of time trying to build a video out solution for the 6100s so their new owners don't have to...

In case anyone else is looking to do this, note that not all M0100 mice will work. Of the 5 M0100 mice I had, only one had compatible insides. First, it must be the version with 2 screws by the cable. I have one M0100 mouse that looks to be a rebadges Apple IIc mouse with a single screw on...

The G3 AIO? I did post about it here: https://tinkerdifferent.com/threads/the-black-mac-no-one-asked-for-powermac-g3-all-in-one-molar.3189/ Yeah, once I get all these machines sorted, I'm going to have to decide which to keep (and which of my existing machines I need to pass along. I will...

I was trying to avoid interfering with the PDS slot screws. And giving more space for the potential 3d printed cover. I also don't have a 7100 to see where the cooling vents are. Looking at my 6100, it does appear I could put it closer to the right. I'll adjust my PCB...

Yes, I have some 0.52 round header pins on the way, but couldn’t find any 2mm pitch longer headers (probably will need ~12mm length) with round pins. This was just to test the spacing of my HDI-45 layout in Eagle. Although I did confirm all the pins fit very snug and were making secure...

Yeah, that diagram was for the PCB pins on the board, not the external connector. The connector is actually less than 2mm between pins. I just did that real quick. The pins on the adapter appear to be ~0.6mm round pins. The pins I used were 0.5 square pins. I did not. The pins were such a...

OK, so my initial test board to confirm my spacing was correct came in. My original plan to use headers with the plastic spacers in place didn't work because there simply isn't enough room. I could use the spacers on rows 1, 3, and 5, and then insert bare pins into the spots needed in rows 2...

That’s why I’m proposing two. Simple to have two versions of the Gerber’s, with the board being basically the same, and even possibly you could have a 3-D case that would work for both, with just a wider and taller opening to accommodate both the DB 15 and the HD 15 ports. getting the PCB...

I was certainly planning to put pins in the “extreme” positions. But he outside pins with different spacing are standard 2.54mm spacing, so it should be easy. Originally, I was very concerned about the pin alignment when I was considering a 1-for-1 replacement of the current adapter. Meaning...