Search results

These boards all need fully resoldered, and fully recapped now. The solder joints have gotten atrocious on these boards. Also de-oxit the middle cable that goes between the front and the middle, which carry the video signals. As well as resoldering all of that. That usually takes care of most...

those white caps always crack. Its a white RIFA. Has to be changed.

Bumping this. I need the same thing, as my machines are missing the battery and battery door. the battery doors are brittle, and having a big hole there just isnt a good look.

Diodes are almost never visual, thats why when i run into weird power supply faults, i grab a DMM and check nearly everything

Bump... Yeah thats the stock ROM. Quickboot from what I saw is a ROM coupled with a PAL which hides the entire Macworks bootstrap inside of it so itll boot from SCSI. Sigma7 made em and apparently no longer sell them. Also didnt pass the torch to anyone else that I can see to keep them going.

Some of them were, yeah. The ones that were traditional IDE, Toshiba was notorious for hardcoding the BIOS to only work with their specific drive bundled with that machine so you need the expansion card which has an XT-IDE to CF solution.

The Toshiba T1XXX line are horrible for pissing capacitors everywhere, eating traces away and even blowing up transistors. I have worked on many. The T1200, and especially the T1200xe is the worst offender. I have a pair of those and I have been unable to repair them. The power supply...

Does anyone happen to know if there is a good color match for the Powerbook 1xx line on 3D printing filament?

I picked up a set of those chips from the Poland auction just to have them on hand for later. I will need to build a programmer eventually.

DosFox finally took the plunge and bought NOS chips, programmed them with the dumps and they do work. He has not provided any more details outside of that yet. Tons of NOS chips are available on ebay, but theres several variations. The specific IC variation has not as of yet been reported. I...

how are you even getting color pictures/screenshots from an SE?

Sorry this thread has gotten way to large to understand what happened since ive last been here. Not sure what i need to test, not test, with what software, or otherwise. TLDR. Also, I was affected by the hurricane pretty badly and im just now starting to get back into operational status over here.

So in other words, youre just waiting for /DTACK at that point?

Ok, just tried it. Mixed results. On one hand, it lasted longer! I could click the sound more times but it still locked up/crashed. I could jump between sounds or play the sounds at least 10 times before it crashes, whereas before i could only do it 2 or 3 times.

I am using both BlueSCSI and an HDD. BlueSCSI has the bootstrap image and the Wifi Dayna setup. But, the system is still running on the internal Conner HDD. The BlueSCSI itself is the latest V2 WiFi setup, it just does not contain the boot image.

This time, windows defender is balking at me

Problem solved. I can detect the card again!

Yeah let me know if you have newer firmware to try, once I get the USB hacked into place, i will have the machine sitting right here for testing stuff. The problem with the USB that I can see, its in a bad spot on the card. there is a hole punched into the chassis right where the USB connector...

Time to make a rig from hell, its the only thing I have handy:

Crashes with Address Error. This time around the sound was garbly instead of clean just before the address error (The Radius card does the same garbly sound but no errors). I wont be able to do any more firmware updates/testing until I can figure out this USB situation. Edit: After a crash...