Search results

Thank you so much for this information, I am sorry for asking this information of you when I should be able to find it myself, the problem is that I find it very difficult to sift through information effectively without going down like 5 different rabbit holes. Also if you don't mind me...

Could you maybe link that thread?

Thanks, do you know if I could use two of the heatsinks from a 1.6Ghz or 1.8Ghz cpu, to air cool the quad?

Also it was kinda working bleeding the system is a nightmare. And I also found out that the pmv PCBs die because of a particular component. I will look into the pump options.

What pumps can I use? Is it able to be any type of pc pump? Also where would I get the air cooled heatsinks?

OK!!! Update this is my plan for a single pump dual loop. Please excuse how crude it is, I am needing to get proper tubing (and maybe fittings and joints and maybe even pipe), but I want to know if this would work at all. So I will just do a quick test to see if it can pump water through it...

Now I have a really insane question, if I do the plumbing right, could I run my system using only one pump? Yes one of the pumps just up and died on my after the PCB released the magic smoke and burnt itself (see pictures). Now I think that I have found a replacement PCB, but I would like some...

Thank you so much for this. Now I have a really insane question, if I do the plumbing right, could I run my system using only one pump? Yes one of them just burnt the PCB and died on me.

Oh OK thank you so much, maybe that is one reason as to why it hasn't worked properly for me before. Also do you know of anyone who has taken apart their dual pump LCS fully and then rebuilt it? I am just a little bit nervous about mucking up as I dont want to miss any screws or put them in the...

Thank you again so much, can I just ask if there is anything special I need to do when burning the CD? Like does it have to be a CD? And does it have to be made using a certain program? Amd does it need to be done on a mac or can it be done on Windows? Again thank you for all your help, I am...

Thank you so much, I was getting really worried after reading that i should mark what cpu came from what slot. I was worried that something like a voltage difference would kill or damage one of them, like if one of them was wired up in a mirror or if it was just the same and simply didn't like a...

So I am kinda embarrassed to say that I have not marked the CPUs to identify which slot each one goes in. And I was wondering if someone could enlighten me to help me understand what would happen if I put them in the opposite slots? How do I tell if I have them in the right slots, or is there no...

Thank you so much for you fast response, this is very helpful to know. Can I ask what the size for the tubes is for the ones that are connected to the CPU block? I feel like replacing the tubes is a good move here because I feel like there was some serious damage done to them in the disassembly...

OK, so I am working on restoring a PowerMac G5 quadcore dual 2.5 cpu double pump liquid cooled system for a friend, and I am currently at the point where I have removed the radiator, tubes and pumps from the system, and I have emptied and cleaned the loops, and repaired the radiator as best I...

Ok I am going to get straight to the point, The DELL c840 laptop that I am trying to use to install Windows 2k kernel ex on is having an issue each time I try to log into it after I install the final part of the patch. I am on a local only account, but whenever I install the extended kernel, I...

Hi again everyone, this time I am wondering if someone on this site has an ASUS R2H UMPC? I am not sure if I am in the right place but I just thought that because it is in the x86 line of machines, and these are technically IBM compatibles, it would be my best bet for getting some help. So now...

Hi again everyone. I am finally getting around to more of my projects that have been on the back burner for a while (in some cases upto 8 years), and I am wanting to get one really annoying one out the way. You see I have a HP ProBook 640 G1, that I got from an Ewaste place that I used to go...

Thank you, currently my research has been able to tell me that I most likely have a 1979 model that has about 79cc, and I have also been able to find a parts and maintenance service manual. So I can find parts easier, I have also found about 3 restoration of similar bikes on youtube. I am hoping...

Firstly, thank you for your support and encouragement. I will make sure to keep in mind that it is ok to ask for help from a professional, along with confirming that it is a great choice to get my neighbor involved. Secondly, I will be really looking forward to posting updates throughout the...

Ok it has been a while since I posted on these forums, I still am working on the powerbook 170, (and other projects). But this is not why I have not come on here today. No. Why I have come on here is to post about a project that I intend to pick up in the coming months and was wondering is...