Search results

I am so dumb...the sweeping noise does not come from the power-supply... I copied the ADTpro version from the IIgs and this expects another modem, If I do not use 2.0.2 ADTpro and use 1.2.1 instead there is no high-pitched noise...but the floppy issue is still there and therefore not related to...

...final thoughts.... if there is a difference between the internal mac-floppy and the external floppy using via IIe card? what about using a 3,5" external floppy on the IIe card...perhaps the floppy from the IIgs? perhaps the floppy-controller on the IIe card is really defective and the...

last shot on this...no luck here

small progress...

Hi there my IIe card in my LC2 6.08. behaves like that: Version 1.0 => Your apple IIe card is defective problem #1 Version 2.0 => Your apple IIe card is defective problem #1 Version 2.2.1d => boots to prodos-partition or local floppy driver 3,5", never boots to 5,25" drive (correct drive...

I have 10 different adapter and you can switch them whatever you like, you get only a picture with one certain monitor..all others fail to get a picture and the one that does works with every adapter and !every! SETTING.

Hi there, I have a macintosh II and I bought the 256color card for it. It was very hard to find an LCD Monitor that syncs with that 256color Nubus card. I recognized moving white lines when the SCSI bus is accessed. Where Do I have to look...could this be the gfx-card or is this something else...

I need images for my AtariST (Mega4/MegaSTE) as well as for my A2000 with GVP+ Controller.

Just ordered a DB25 one. we will see how this turns out ;)

Next thing for me is getting an external bluescsi one to hook it up on my GVP controller on my A2000. I don't think I can use DJ to produce 1GB SCSI-Drives that are usable on the Amiga?

First run on MKlinux with PM6100 and bluescsi was a failure. Lot's of writing issues on the bluescsi on a brandnew SD-card. (7.5.3. installation was 100% OK on that machine) Is there are problem with MKlinux and blueSCSI ? btw. MKLinux uses EXT2 filesystem for root.

Was the sd-card. Changed it and now it works great on my PM6100. The flashing process did not work for me. Homebrew/apple dev/compiling...8GB and lot's of time...stopped with an compiling error...changed the sd-card and it worked...should have tried this bevor achieving the firmware-...

Got another two bluescsi and wanted one in my PM6100/66. Prepared the SD Card as before bit the PM6100 does not see any drive connected to the machine. I checked the other working bluescsi in my LC against it, but it's the same. I am currently patching one bluescsi....perhaps this will fix the...

Would be interesting how Master/Slave detection is different on cold/warm reboot.

It can't be the 40/44pin adapter because there is no logic in that thing. It can only be the SSD itself or the case with the transfer m2-sata to IDE44 logic. Some other people have exact the same issue with thiere solution and that is different from mine. They said it's the master/slave logic...

This is indeed very cool, but why can't I use this on 10.6.8 on my retro-mini. Any chance to get this running on 10.6.8 or is it impossible due to limitations? Thx! EDIT: Beside that, when formatting SD-Cards for preparation exFAT with what boot record (e.g. MBR, or GUID or ?)

Hi there I have to try another thing on my G4-Cube. My adapter-solution with m-sata-ssd works only on coldboot, every reboot leads to "?" That is very annoying when you have a multi-boot-machine with yaboot and OS9-9.0.3/OSX-10.2.8/YDL3 (beside YDL3 should work on R128pro accelerated (old...