usb

I started designing the connector years ago but never really finished, I planned on using step-down boards and designing a case, much like @PotatoFi ended up doing for the 1xx series. I was a bit reluctant to sending only 15 volts, and I'd have liked to be able to check on schematics, but I...

I just finished re-celling a few iBook G3 battery packs. While this will allow me to use them without being plugged in, and it certainly maximizes the portable nature of these machines, I had a couple thoughts: 1. I do have concerns about the safety of home built packs. I read up on it, bought...

Hi everyone, first post here, basically looking to solicit some expert knowledge for getting 10.3 installed onto my slot loading iMac G3. The story is: I have a slot loading iMac G3 (350MHz, 128MB RAM) and like many slot loading Macs from this era the disc loading mechanism is basically...

So I've acquired a Jaz USB Adapter (very cheaply, I should add!) which came with an Iomega 25-pin SCSI adapter. Since SCSI is SCSI and USB is USB, it should work as a generic SCSI to USB adapter, no? However as a test I plugged it into my modern machine connected to a Zip 100 SCSI (with disk...

This resource is dedicated to the testing and conversion of ADB devices to USB for use on modern computers, emulators or authentic-esque hackintosh etc. This example will be using an ATmega32u4 5v 16 MHz Pro Micro controller with micro USB port. An example can be purchased here: ATMega32U4 Pro...