Hi there All,
I have a Power Macintosh G3 in and the plastics are very crumbly, so i have spend a few hours to make the needed parts in CAD and i have test fitted them. a few revisions down the line, they are ready to print.
Here to share:
- HDD slide in brackets (the ones that live on the metal frame)
- Slide lock to lock the swivel frame in place
- HDD bracket for mounting to the drive
0.4mm nozzle, 0.1mm step height, ideally PETG material print with supports. please check slicer image for best print orientation.
Happy printing!
Arjen.
I have a Power Macintosh G3 in and the plastics are very crumbly, so i have spend a few hours to make the needed parts in CAD and i have test fitted them. a few revisions down the line, they are ready to print.
Here to share:
- HDD slide in brackets (the ones that live on the metal frame)
- Slide lock to lock the swivel frame in place
- HDD bracket for mounting to the drive
0.4mm nozzle, 0.1mm step height, ideally PETG material print with supports. please check slicer image for best print orientation.
Happy printing!
Arjen.
Attachments
Last edited:
